APPROVED VENDOR Concrete Anchor Screw: 1 1/2 in Overall Lg, 1/4 in Dia, Steel, Zinc Yellow
The APPROVED VENDOR Concrete Anchor Screw (MPN 14112HS) is a 1 1/2 in overall length, 1/4 in diameter hex-head screw anchor made of steel with a zinc yellow finish. Supplied in a 100-pack, this inch-system…
SKU 3G-OTH-540286
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The APPROVED VENDOR Concrete Anchor Screw (MPN 14112HS) is a 1 1/2 in overall length, 1/4 in diameter hex-head screw anchor made of steel with a zinc yellow finish. Supplied in a 100-pack, this inch-system, pointed-tip, removable concrete screw anchor is not graded by material grade/class.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the APPROVED VENDOR Concrete Anchor Screw 14112HS used for?
This hex-head concrete screw anchor is used to fasten fixtures, brackets, or equipment to concrete, brick, or block. Its pointed tip and removable design make it suitable for temporary or permanent industrial mounting across construction, maintenance, and facility applications.
What are the specifications of the APPROVED VENDOR Concrete Anchor Screw 14112HS?
The APPROVED VENDOR Concrete Anchor Screw (MPN 14112HS) has a 1 1/2 in overall length and 1/4 in diameter. It is made of steel with a zinc yellow finish, has a pointed tip, is removable, and uses an inch system. Supplied in a 100-pack, it is not graded by material grade/class.
Where to buy APPROVED VENDOR Concrete Anchor Screw 14112HS worldwide?
3G Electric supplies the APPROVED VENDOR Concrete Anchor Screw 14112HS to customers worldwide. As a global industrial solutions provider, we handle full logistics, customs clearance, and delivery to your site. Contact us for availability and a quote tailored to your location.
How to install the APPROVED VENDOR Concrete Anchor Screw 14112HS?
Drill a pilot hole into concrete using a hammer drill and a carbide bit sized to the anchor diameter. Clean the hole of dust, then drive the screw anchor with a hex driver until the head is flush. The pointed tip aids alignment, and the zinc yellow finish resists corrosion during installation.
Digunakan dalam
Aplikasi umum untuk APPROVED VENDORAPPROVED VENDOR Produk
3G Electric memasok APPROVED VENDOR hex-head screw anchors. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.









