APPROVED VENDOR Concrete Anchor Screw: 1 in Overall Lg, 1/4 in Dia, Steel, Zinc Yellow
The APPROVED VENDOR Concrete Anchor Screw (MPN 14100PS) is a 1 in overall length, 1/4 in diameter flat-head screw anchor made of steel with a zinc yellow finish. This removable, pointed-tip concrete screw anchor is…
SKU 3G-OTH-540859
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The APPROVED VENDOR Concrete Anchor Screw (MPN 14100PS) is a 1 in overall length, 1/4 in diameter flat-head screw anchor made of steel with a zinc yellow finish. This removable, pointed-tip concrete screw anchor is supplied in a 100-pack and is not graded.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the APPROVED VENDOR 14100PS concrete anchor screw used for?
The APPROVED VENDOR 14100PS is a 1/4 in diameter, 1 in long flat-head concrete screw anchor used to fasten fixtures, brackets, or equipment to concrete, brick, or block. Its zinc yellow finish provides moderate corrosion resistance, and the pointed tip enables easy installation into pre-drilled holes.
What are the specifications of the APPROVED VENDOR 14100PS concrete anchor screw?
The APPROVED VENDOR 14100PS is a 1/4 in diameter, 1 in overall length steel concrete screw anchor with a zinc yellow finish. It has a pointed tip, is removable, and is supplied in a 100-pack. The anchor type is screw, and it is not graded per material grade/class.
Where to buy APPROVED VENDOR concrete anchor screws in worldwide?
3G Electric supplies the APPROVED VENDOR 14100PS concrete anchor screw to customers worldwide. As a global industrial solutions provider, we handle full logistics, customs clearance, and delivery to your site. Contact us for pricing and lead time on this 100-pack of 1/4 in diameter zinc yellow anchors.
How to install the APPROVED VENDOR 14100PS concrete screw anchor?
Drill a hole in concrete using a carbide bit sized to the anchor diameter (1/4 in). Clean dust from the hole, then drive the APPROVED VENDOR 14100PS screw anchor with a screwdriver or impact driver until the flat head is flush. The pointed tip aids alignment, and the anchor is removable if needed.
Digunakan dalam
Aplikasi umum untuk APPROVED VENDORAPPROVED VENDOR Produk
3G Electric memasok APPROVED VENDOR flat-head screw anchors. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.









