APPROVED VENDOR Concrete Anchor Screw: 3 in Overall Lg, 1/4 in Dia, Steel, Zinc Yellow
The APPROVED VENDOR Concrete Anchor Screw (MPN 14300PS) is a 3-inch overall length, 1/4-inch diameter flat-head screw anchor made of steel with a zinc yellow finish. This removable, pointed-tip concrete screw anchor…
SKU 3G-OTH-540815
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The APPROVED VENDOR Concrete Anchor Screw (MPN 14300PS) is a 3-inch overall length, 1/4-inch diameter flat-head screw anchor made of steel with a zinc yellow finish. This removable, pointed-tip concrete screw anchor is supplied in a 100-pack and is not graded.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the APPROVED VENDOR 14300PS concrete anchor screw used for?
The APPROVED VENDOR 14300PS is a 1/4-inch diameter, 3-inch long flat-head concrete screw anchor used to fasten fixtures, brackets, or equipment into concrete, brick, or block. Its zinc yellow finish provides moderate corrosion resistance, and the pointed tip enables direct installation into pre-drilled holes.
What are the specifications of the APPROVED VENDOR 14300PS concrete anchor screw?
The APPROVED VENDOR 14300PS is a 3-inch overall length, 1/4-inch diameter steel concrete screw anchor with a zinc yellow finish. It has a pointed tip, is removable, and is supplied in a 100-pack. The anchor type is screw, and it is not material-grade classified.
Where to buy APPROVED VENDOR 14300PS concrete anchor screws worldwide?
3G Electric supplies the APPROVED VENDOR 14300PS concrete anchor screw worldwide. As a global industrial sourcing partner, we handle full logistics, customs clearance, and delivery to your site. Contact us for pricing and lead time on this 100-pack of 1/4-inch diameter, 3-inch long zinc yellow steel anchors.
How to install the APPROVED VENDOR 14300PS concrete screw anchor?
To install the APPROVED VENDOR 14300PS, drill a hole in concrete using a carbide bit sized to the anchor diameter (1/4 inch). Clean the hole of dust, then drive the screw anchor with a suitable driver until the flat head is flush. The pointed tip aids alignment, and the anchor is removable if needed.
Digunakan dalam
Aplikasi umum untuk APPROVED VENDORAPPROVED VENDOR Produk
3G Electric memasok APPROVED VENDOR flat-head screw anchors. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.









