APPROVED VENDOR Concrete Anchor Screw: 6 in Overall Lg, 1/4 in Dia, Steel, Blue Ruspert
The APPROVED VENDOR Concrete Anchor Screw (MPN U70526.025.0600) is a 6-inch overall length, 1/4-inch diameter flat-head screw anchor made of case-hardened steel with a Blue Ruspert finish, supplied in a 100-pack. It…
SKU 3G-OTH-540880
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The APPROVED VENDOR Concrete Anchor Screw (MPN U70526.025.0600) is a 6-inch overall length, 1/4-inch diameter flat-head screw anchor made of case-hardened steel with a Blue Ruspert finish, supplied in a 100-pack. It features a self-tapping tip and is removable, designed for inch-system concrete fastening applications.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the APPROVED VENDOR concrete anchor screw used for?
This flat-head screw anchor is used for fastening fixtures, brackets, and equipment to concrete, block, or brick in industrial and commercial settings. Its self-tapping tip and removable design make it suitable for temporary or permanent installations where inch-system fasteners are required.
What are the specifications of the APPROVED VENDOR concrete anchor screw?
The APPROVED VENDOR concrete anchor screw (MPN U70526.025.0600) has a 1/4 in diameter, 6 in overall length, case-hardened steel construction, and a Blue Ruspert finish. It is a removable, self-tapping screw anchor for inch-system applications, supplied in a 100-pack.
Where to buy APPROVED VENDOR concrete anchor screws worldwide?
3G Electric supplies APPROVED VENDOR concrete anchor screws worldwide. As a global industrial solutions provider, we handle full logistics and customs clearance to deliver this 100-pack of 1/4 in x 6 in case-hardened steel screw anchors to your facility, regardless of location.
How to install an APPROVED VENDOR concrete anchor screw?
Drill a pilot hole into the concrete using a carbide-tipped bit of the specified diameter. Clean the hole of dust, then drive the self-tapping screw anchor through the fixture into the hole with a screwdriver or impact driver until the flat head is seated. The screw is removable if needed.
Digunakan dalam
Aplikasi umum untuk APPROVED VENDORAPPROVED VENDOR Produk
3G Electric memasok APPROVED VENDOR flat-head screw anchors. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.









