APPROVED VENDOR Carbon Steel Sheet: A1011, 0.12 in Thick, 4 ft x 8 ft Nominal Size (WxL)
The APPROVED VENDOR Carbon Steel Sheet (A1011) is a hot-rolled, mill-annealed formable sheet measuring 0.12 in thick with a 4 ft x 8 ft nominal size. This carbon steel sheet has a thickness tolerance of 0 in/-0.007…
SKU 3G-OTH-590945
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The APPROVED VENDOR Carbon Steel Sheet (A1011) is a hot-rolled, mill-annealed formable sheet measuring 0.12 in thick with a 4 ft x 8 ft nominal size. This carbon steel sheet has a thickness tolerance of 0 in/-0.007 in and is not heat treatable, supplied without certificates.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the APPROVED VENDOR A1011 carbon steel sheet used for?
This hot-rolled, mill-annealed carbon steel sheet is used for general fabrication, forming, and structural applications where moderate strength and formability are required. It is commonly employed in automotive parts, machinery guards, brackets, and enclosures across industrial sectors.
What are the specifications of the APPROVED VENDOR A1011 carbon steel sheet?
The sheet is 0.12 in thick, 4 ft x 8 ft nominal size, hot rolled, mill annealed, and not heat treatable. Material is carbon steel per A1011. Thickness tolerance is 0 in/-0.007 in. No certificates are included. Manufacturer part number: SHT-A1011-0.119X48X96.
Where to buy the APPROVED VENDOR A1011 carbon steel sheet worldwide?
3G Electric supplies and delivers the APPROVED VENDOR A1011 carbon steel sheet worldwide. As a global industrial solutions provider, we handle full logistics and customs clearance to ensure the sheet reaches your facility, regardless of location.
How to select the right thickness for a carbon steel sheet project?
Select thickness based on load requirements and forming needs. For light-duty brackets or enclosures, 0.12 in (11 gauge) offers good formability. For heavier structural parts, consider thicker gauges. Always verify thickness tolerance (0 in/-0.007 in) to ensure fit in your assembly.
Digunakan dalam
Aplikasi umum untuk APPROVED VENDORAPPROVED VENDOR Produk
3G Electric memasok APPROVED VENDOR formable a1011 carbon steel sheets & plates. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
