APPROVED VENDOR Carbon Steel Sheet: A1011, 0.135 in Thick, 4 ft x 8 ft Nominal Size (WxL)
The APPROVED VENDOR Carbon Steel Sheet (SKU 816P27, MPN SHT-A1011-0.134X48X96) is a hot-rolled, mill-finished A1011 sheet measuring 0.135 in thick with a 4 ft x 8 ft nominal size. This annealed, non-heat-treatable…
SKU 3G-OTH-590931
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The APPROVED VENDOR Carbon Steel Sheet (SKU 816P27, MPN SHT-A1011-0.134X48X96) is a hot-rolled, mill-finished A1011 sheet measuring 0.135 in thick with a 4 ft x 8 ft nominal size. This annealed, non-heat-treatable carbon steel sheet has a thickness tolerance of 0 in/-0.006 in and is supplied without certificates.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the APPROVED VENDOR A1011 carbon steel sheet used for?
This hot-rolled, mill-finished carbon steel sheet is used for general fabrication, structural supports, brackets, and enclosures where formability and weldability are needed. It is suitable for industrial maintenance, repair, and custom metalwork across machining, material handling, and construction applications.
What are the specifications of the APPROVED VENDOR carbon steel sheet?
The sheet is 0.135 in thick, 4 ft x 8 ft nominal size, made from A1011 carbon steel, hot rolled and mill finished. It is annealed, not heat treatable, with a thickness tolerance of 0 in/-0.006 in. Supplied without certificates. MPN: SHT-A1011-0.134X48X96.
Where to buy the APPROVED VENDOR A1011 carbon steel sheet worldwide?
3G Electric supplies and delivers the APPROVED VENDOR A1011 carbon steel sheet worldwide. We handle full logistics, customs clearance, and delivery to your site. Contact us for pricing and lead time on this hot-rolled sheet for your industrial fabrication needs.
How to select the right thickness for a carbon steel sheet?
Select thickness based on load requirements and forming needs. For light structural or non-critical parts, 0.135 in is common. Check thickness tolerance (0 in/-0.006 in) to ensure fit-up. For bending or welding, hot-rolled annealed sheets like this offer good formability without heat treatment.
Digunakan dalam
Aplikasi umum untuk APPROVED VENDORAPPROVED VENDOR Produk
3G Electric memasok APPROVED VENDOR formable a1011 carbon steel sheets & plates. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
