APPROVED VENDOR Key Locking Insert: Thin Wall, 2 Keys, M6x1 Int Thrd Sz, M10x1.25 Ext Thrd Sz
APPROVED VENDOR Key Locking Insert: Thin Wall, a steel key-locking insert with 2 keys, M6x1 internal thread and M10x1.25 external thread, in a 10-pack. It features a zinc phosphate finish, C1215 material grade, 7-1/2…
SKU 3G-OTH-528461
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
APPROVED VENDOR Key Locking Insert: Thin Wall, a steel key-locking insert with 2 keys, M6x1 internal thread and M10x1.25 external thread, in a 10-pack. It features a zinc phosphate finish, C1215 material grade, 7-1/2 mm drill bit size, compatible with M10x1.25 tap, and external/internal thread fits of 2A and 2B.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is a key locking insert used for?
A key locking insert repairs or reinforces tapped holes in softer materials like aluminum or cast iron. The external keys lock into the parent material to prevent rotation under load, providing a durable, reusable steel thread. This APPROVED VENDOR thin-wall insert is ideal for applications requiring high pull-out strength without increasing hole size.
What are the specifications of the APPROVED VENDOR key locking insert?
This thin-wall insert has an M6x1 internal thread and M10x1.25 external thread, with 2 keys. It is made from C1215 steel with a zinc phosphate finish. The drill bit size is 7-1/2 mm, compatible tap size is M10x1.25, and thread fits are 2A external and 2B internal. Supplied in a 10-pack.
Where to buy APPROVED VENDOR key locking inserts worldwide?
3G Electric supplies APPROVED VENDOR key locking inserts to customers worldwide. We handle full logistics, customs clearance, and delivery to your site. As a global industrial sourcing partner, we provide genuine parts like this thin-wall insert with M6x1 internal thread, ensuring you get the correct specification for your repair or assembly application.
How to install a key locking insert?
Drill the hole to 7-1/2 mm, tap it with an M10x1.25 tap, then screw the insert onto the installation tool until the keys align with the slots. Drive the insert into the tapped hole until it is slightly below the surface. Remove the tool and break off the drive tang if present. The zinc phosphate finish aids installation and resists corrosion.
Digunakan dalam
Aplikasi umum untuk APPROVED VENDORAPPROVED VENDOR Produk
3G Electric memasok APPROVED VENDOR steel key-locking inserts. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
