BECK Pipe Nipple: 6 in Nominal Pipe Size, 9 1/2 in Lg, Schedule 40, Galvanized Steel
The BECK Pipe Nipple is a Schedule 40, galvanized steel, welded pipe nipple with a 6-inch nominal pipe size and 9 1/2-inch length. It features Male NPT x Male NPT threaded connections on both ends, with a maximum…
SKU 3G-OTH-473416
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The BECK Pipe Nipple is a Schedule 40, galvanized steel, welded pipe nipple with a 6-inch nominal pipe size and 9 1/2-inch length. It features Male NPT x Male NPT threaded connections on both ends, with a maximum operating pressure of 150 psi at 150°F. Made in the USA, this component is part of our broader industrial supply across 14 departments, with specialist depth in combustion, pumps, and controls.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is a BECK pipe nipple used for?
A BECK pipe nipple connects two male NPT threaded fittings in industrial piping systems. This Schedule 40 galvanized steel nipple is used for water, gas, and low-pressure steam lines where corrosion resistance and a leak-tight joint are required.
What are the specifications of the BECK 0331063206 pipe nipple?
The BECK 0331063206 is a 6-inch nominal pipe size, 9 1/2-inch long, Schedule 40 galvanized steel welded nipple. It has Male NPT x Male NPT connections, a maximum operating pressure of 150 psi at 150°F, and is made in the USA.
Where to buy a BECK pipe nipple worldwide?
3G Electric supplies the BECK pipe nipple worldwide. We handle full logistics, customs clearance, and delivery to your site. As a global industrial solutions provider, we source genuine components like this Schedule 40 galvanized nipple for your project.
How to install a BECK galvanized steel pipe nipple?
Apply pipe thread sealant or PTFE tape to the male NPT threads. Hand-tighten the nipple into the fitting, then use a wrench for an additional 1-2 turns. Avoid overtightening to prevent stress cracking. Always verify pressure rating compatibility with your system.
Digunakan dalam
Aplikasi umum untuk BECKBECK Produk
3G Electric memasok BECK schedule 40 threaded on both ends pipe & pipe nipples. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
