BRENNAN INDUSTRIES Compression Tube Straight: 30 mm OD x 16 mm OD Size
The BRENNAN INDUSTRIES Compression Tube Straight is a flareless bite type steel compression fitting with seal, part of the D7400-ED series (MPN D7400-S30-16-ED). It accommodates 30 mm OD x 16 mm OD tube sizes and…
SKU 3G-OTH-480447
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The BRENNAN INDUSTRIES Compression Tube Straight is a flareless bite type steel compression fitting with seal, part of the D7400-ED series (MPN D7400-S30-16-ED). It accommodates 30 mm OD x 16 mm OD tube sizes and features an M42X2.0 x 1-11 thread size.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is a BRENNAN INDUSTRIES D7400-S30-16-ED compression fitting used for?
This flareless bite type steel compression fitting with seal connects 30 mm OD to 16 mm OD tubing in hydraulic and pneumatic systems. It is used in industrial fluid power applications where a leak-tight, vibration-resistant joint is required, such as in machining, material handling, and power transmission equipment.
What are the specifications of the BRENNAN INDUSTRIES D7400-S30-16-ED?
The BRENNAN INDUSTRIES D7400-S30-16-ED is a flareless bite type steel compression fitting with seal from the D7400-ED series. It has a 30 mm OD x 16 mm OD tube size and an M42X2.0 x 1-11 thread size. The manufacturer part number is D7400-S30-16-ED.
Where to buy BRENNAN INDUSTRIES D7400-S30-16-ED worldwide?
3G Electric supplies the BRENNAN INDUSTRIES D7400-S30-16-ED compression fitting to customers worldwide. We handle full logistics, customs clearance, and delivery to your site. Contact us for a quote and lead time on this flareless bite type steel fitting.
How to install a flareless bite type compression fitting like the D7400-S30-16-ED?
Insert the tube fully into the fitting until it bottoms out, then tighten the nut by hand. Use a wrench to tighten the nut to the manufacturer's recommended torque, which causes the bite ring to grip the tube. Do not overtighten, as this can damage the seal or tube.
BRENNAN INDUSTRIES Produk
3G Electric memasok BRENNAN INDUSTRIES flareless bite type steel compression fittings with seal. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
