BRENNAN INDUSTRIES Compression Tube Straight: 30 mm OD x 20 mm OD Size, Compression x MBSPP
The BRENNAN INDUSTRIES Compression Tube Straight is a flareless bite type steel compression fitting with seal, configured as Compression x MBSPP. It connects 30 mm OD to 20 mm OD tube sizes and is part of the…
SKU 3G-OTH-480463
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The BRENNAN INDUSTRIES Compression Tube Straight is a flareless bite type steel compression fitting with seal, configured as Compression x MBSPP. It connects 30 mm OD to 20 mm OD tube sizes and is part of the D7505-ED series (MPN D7505-S30-20-ED).
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is a BRENNAN INDUSTRIES compression tube straight fitting used for?
This flareless bite type steel compression fitting with seal connects 30 mm OD to 20 mm OD tubing in hydraulic and pneumatic systems. It provides a leak-tight joint in industrial fluid power applications, commonly found in manufacturing, oil and gas, and heavy equipment.
What are the specifications of the BRENNAN INDUSTRIES D7505-S30-20-ED?
The BRENNAN INDUSTRIES D7505-S30-20-ED is a compression tube straight with Compression x MBSPP ends, made of steel. It connects 30 mm OD to 20 mm OD tube sizes and is part of the D7505-ED series. The manufacturer part number is D7505-S30-20-ED.
Where to buy BRENNAN INDUSTRIES compression fittings worldwide?
3G Electric supplies BRENNAN INDUSTRIES compression fittings worldwide. As a global industrial solutions provider, we handle full logistics, customs clearance, and delivery to your site. Contact us for pricing and lead time on the D7505-S30-20-ED or other D7505-ED series fittings.
How to install a flareless bite type compression fitting?
Cut the tube square, deburr, and slide the nut and ferrule onto the tube. Insert the tube fully into the fitting body, then tighten the nut by hand. Use a wrench to tighten further until the ferrule bites into the tube. Follow BRENNAN INDUSTRIES torque specifications for the 30 mm OD size.
BRENNAN INDUSTRIES Produk
3G Electric memasok BRENNAN INDUSTRIES flareless bite type steel compression fittings with seal. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
