Honeywell Gas block V 4600 C 1086 U

V4600/V8600E,T COMPACT GAS CONTROL WITH THROTTLE VALVE INSTRUCTION SHEET Dimensions See fig. 1. Ambient temperature 0 ... 70 _C Pipe connection Pipe connections are designed to meet the bending stress of group 2 according to EN 161. Standard: Inlet: 1/2” ISO 7--1 internal parallel pipe thread. Outlet: 1/2” ISO 7--1 internal parallel pipe thread or Ø18.6 mm without thread. Inlet and outlet can also be made with straight or elbow flanges. Special connection: Side outlet Ø14 mm Pilot gas connection APPLICATION Standard at end outlet: 1/4”, 4 mm or 6 mm outer diameter tubing. V4600/V8600E,T gas controls, together with Honeywell pilot Special connection: Included in the side outlet. burner/thermocouple and room/boiler thermostats, provide all the functions necessary to safely regulate gas flow pilot Capacity* burner and main burner manifold of domestic heating boilers In m3/h air at nP of 2.5 mbar. (free standing and wall mounted), warm air furnaces and back Pipe connection Capacity boilers. 1/ ” x 1/ ” 3.15 V4600/V8600E,T gas controls are intended to be used for 2 2 manufactured, natural and LP gases (1st, 2nd, 3rd family gas). 1/ ” x Ø18.6 mm 2 3.15 V4600/V8600E,T gas controls are approved in accordance 1/ ” x Ø14 mm side outlet 2 2.2 with existing european standards. * Capacity curves are available on request. DESCRIPTION Minimum differential pressure Between inlet and outlet: 2.5 mbar V4600/V8600E,T gas controls comprise a pilotstat mechanism, throttle valve and an electric operated on/off Minimum adjustable capacity valve. 1.5 m3/h air at nP of 20 mbar The pilotstat is a thermoelectric safety device according to european standards EN 125 and EN 126 and closes off the Maximum operating pressure gas supply to both main burner and pilot burner. The Pmax indication on the housing of the gas control is the The electric on/off servo operator is an automatic shut--off maximum inlet pressure at which the gas control functions valve of class J according to EN 161 and closes off the gas safely. supply to the main burner. Mounting holes SPECIFICATIONS Two M5 mounting holes are located on the bottom of the gas control. Models The four holes at inlet and outlet for mounting the flange on the gas control are provided with M5 thread with minimum V4600 serie: 220/240 V, 50 Hz. 6.5 mm full thread. V8600 serie: 24 V, 50 Hz. Suffix E: fast opening and throttle valve The four holes for mounting the flange to the side outlet are Suffix T: slow opening and throttle valve provided with M4 thread with min 6 mm full thread. EN1R--9099 0109R7--NE  94 Side outlet M5x0.8(8) 6.5 mm No imperfections allowed at 75 min full thread Throttle adjustment the cross hatched area (2) 30 58 7.5 64 360.1 21 22 26 24 180.1 29 180.1 25 360.1 92 107 Compression fitting for Inlet/outlet Pressure tab 4 mm or 6 mm tubing Thermocouple connection with Terminals according to re- route 11/32”- 32NS- 2B 6.3 terminal (2) DIN 43650 Earth screw 16 Pilot outlet 140 97 6.5 87 115 109 100 87 36 111 68.5 37.5 36 1270.7 Outlet 1/2” ISO7- 1 or Æ 18.6 Inlet 1/2” ISO7- 1 11/32”- 32NS- 2B M5(3) min full thread Æ3 side pilot outlet (option) Softlite (suffix T) (option) 33 Æ14 0.5 36 360.1 14 180.1 23 5.50.5 180.1 Mounting hole M5(2) 360.1 M4(4) min full thread (option) 47 Groove for “O” ring Æ17x3 depth 2.40.07 Side outlet Fig. 1. Dimensions and adjustment points Electrical data Enclosure (including cover) IP 40 (with cover or plug) Working voltage Current (mA) Power consumption IP 44 (with plug according to DIN 43650) (W) 220/240 V, 50 Hz 20.4/24 3.4/4.5 INSTALLATION 24 V, 50 Hz 211 3.8 IMPORTANT Take care that installer is a trained experienced Timing…