DSZH Acid Away Pro

NEW! Ready to use delivery method. Compressor Burnout Acid Neutralizer • Quick & easy to inject • Disposable injector • Safe for all oils • Compressor parts safe • Contractor preferred • Same proven, chemical formulation A quick & unique solution to removing and preventing acid buildup in A/C and refrigeration systems. Acid-Away® PRO Compressor Burnout Acid Neutralizer Application • Chemical treatment for Code Description Qty. use in air conditioning and refrigeration 45016 Acid-Away PRO 12 systems that have experienced a burnout, or operating systems that are showing buildup in acid content • Acid-Away PRO F E AT U R ES quickly circulates throughout the system • Quick & easy to inject and chemically neutralizes acids that are • Disposable injector always left in air conditioning or refrigeration • Compressor parts safe systems after a burnout occurs • Once • No harmful effects neutralized, the acid can no longer continue developing corrosion impeding it from • Tested to ASHRAE standards causing another burnout to the system 86-1983 & 97-1989 by premier independent testing institute Recommended for • Air conditioning and refrigeration systems • Safe for all oils • Acid-Away may be used in either hermetic or semi-hermetic compressors that operate with standard CFC or HCFC refrigerants Disposable Installs Using Cartridge Standard HVAC Manifold High Visibility Packaging For Easy ID Maximum operating pressure is 600psi Copper/Brass High Pressure Cartridge Connects To Standard 1/4" Service Ports Low Loss Fitting Acid Level Dosage Light 1.5 oz of Acid Away PRO for each 64 oz of compressor oil volume Medium 1.5 oz of Acid Away PRO for each 48 oz of compressor oil volume Heavy 1.5 oz of Acid Away PRO for each 24 oz of compressor oil volume This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov RectorSeal ® • 2601 Spenwick Drive - Houston, TX 77055 • 800-231-3345 • rectorseal.com RectorSeal, the logos and other trademarks are property of RectorSeal, LLC, its affiliates or its licensors and are protected by copyright, trademark and other intellectual property laws, and may not be used without permission. RectorSeal reserves the right to change specifications without prior notice. © 2020 RectorSeal. All rights reserved. R50113 0520 Acid Away® PRO Instructions Continued: SEE APPLICATION INSTRUCTIONS Application Instructions: PRIOR TO USE. FOR CHEMICAL EMERGENCY, SPILL, LEAK, FIRE, RED Installation to be preformed YELLOW EXPOSURE OR ACCIDENT, CALL with standard HVAC manifold, CHEMTREC - DAY OR NIGHT by a licensed A/C Technician. 1-800-424-9300. 1.) System keeps running in PRO PRO CONTAINS: Refrigeration Oil. cooling mode while injecting PRECAUTIONS: May be harmful Acid Away PRO into system. if swallowed or inhaled. May cause eye and skin irritation. 2.) Connect Acid Away PRO Keep away from heat, sparks injector’s low loss fitting to 4.) Briefly open and close and flames. Use with adequate the low pressure service port manifold high side valve three ventilation. Wash after (i.e. the suction side). times to allow refrigerant to handling. FIRST AID: For any flow through Acid Away PRO overexposure, get immediate PRO injector. medical attention after first aid is given. Eyes - Flush 15 minutes with clean water. Skin RED - Wash with soap and water. Inhalation - Remove to fresh air. Ingestion - Only if consci- ous, give large amounts of water. DO NOT INDUCE 3.) (A) Ensure both valves on VOMITING. FIRE AND SPILLS: manifold gauge set are For fire, use water fog, CO₂ closed. (B) Connect high foam or dry chemicals to pressure (red) hose of mani- 5) With manifold closed, wait extinguish. For spills, shut off fold to the high pressure one minute for charging hose ignition sources ventilate service port (i.e. the liquid and Acid Away PRO injector to confined areas and wipe up side). (C) Barely thread the equalize to suction pressure. with absorbent materials to middle manifold (charging/ prevent footing hazard. yellow) hose to the male Disconnect charging hose STORAGE AND HANDLING: fitting of Acid Away PRO from Acid Away PRO injector. Store in cool, well ventilated injector. Do not thread to area. Keep container upright the point of depressing the Disconnect Acid Away PRO and tightly closed. Do not Schrader core. (D) For best injector from suction service reuse empty container. KEEP results raise the Acid Away port. Discard or recycle empty OUT OF REACH OF CHILDREN. PRO canister above the injector. Run air conditioner service port. (E) Briefly crack for at least 30 minuets to FOR ADDITIONAL INFORMATION, open manifold high side allow product to fully circulate. REFER TO SAFETY DATA SHEET. valve to purge air out of the hose, close manifold high NOTE: If the system is low on side valve; while quickly refrigerant, you may also use Manufactured by RectorSeal tightening the charging hose a refrigerant tank to push 2601 Spenwick Drive, fitting to the inlet fitting on into system. Houston, TX the injector. 77055-1035, USA rectorseal.com Product Code No. 45016