CM Brake Coil: Electric Chain Hoists, 1,000 lb_2,000 lb_4,000 lb Compatible Load Capacity
The CM Brake Coil is a replacement brake coil for electric chain hoists, designed for the Valustar series. It is compatible with hoists having load capacities of 1,000 lb, 2,000 lb, and 4,000 lb, and carries the…
SKU 3G-OTH-330767
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The CM Brake Coil is a replacement brake coil for electric chain hoists, designed for the Valustar series. It is compatible with hoists having load capacities of 1,000 lb, 2,000 lb, and 4,000 lb, and carries the manufacturer part number 51002.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the CM Brake Coil (MPN 51002) used for?
The CM Brake Coil is a replacement component for electric chain hoists in the Valustar series. It engages and releases the hoist brake, enabling safe load holding and controlled lowering. It is compatible with hoists rated for 1,000 lb, 2,000 lb, and 4,000 lb capacities.
What are the specifications of the CM Brake Coil 51002?
The CM Brake Coil carries manufacturer part number 51002. It is designed for the Valustar series of electric chain hoists and is compatible with load capacities of 1,000 lb, 2,000 lb, and 4,000 lb. Always verify compatibility with your hoist model before ordering.
Where to buy the CM Brake Coil 51002 worldwide?
3G Electric supplies the CM Brake Coil 51002 to customers worldwide. As a global industrial equipment distributor, we handle full logistics, customs clearance, and delivery to your site. Contact us for availability and a shipping quote to your location.
How to install the CM Brake Coil on a Valustar hoist?
Installation should be performed by a qualified technician. Disconnect power, remove the hoist cover, and replace the existing brake coil with the CM 51002, ensuring proper alignment. Reassemble and test the brake function before returning the hoist to service. Refer to the hoist manual for torque specs.
Digunakan dalam
Aplikasi umum untuk CMCM Produk
3G Electric memasok CM brake coils for hoists. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
