CM Brake Coil: Electric Chain Hoists
The CM Brake Coil is a replacement brake coil for electric chain hoists, designed for compatibility with the Lodestar series. It supports load capacities of 250 lb, 500 lb, 1,000 lb, and 2,000 lb, and is identified…
SKU 3G-OTH-330769
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The CM Brake Coil is a replacement brake coil for electric chain hoists, designed for compatibility with the Lodestar series. It supports load capacities of 250 lb, 500 lb, 1,000 lb, and 2,000 lb, and is identified by manufacturer part number 51517.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the CM Brake Coil 51517 used for?
The CM Brake Coil 51517 is a replacement brake coil for electric chain hoists, specifically the Lodestar series. It is used to control braking in hoists with load capacities of 250 lb, 500 lb, 1,000 lb, and 2,000 lb, ensuring safe lifting and lowering operations.
What are the specifications of the CM Brake Coil 51517?
The CM Brake Coil 51517 is compatible with electric chain hoists in the Lodestar series. It supports load capacities of 250 lb, 500 lb, 1,000 lb, and 2,000 lb. The manufacturer part number is 51517, and it is designed as a direct replacement brake coil for these hoists.
Where to buy the CM Brake Coil 51517 worldwide?
You can source the CM Brake Coil 51517 through 3G Electric, a global industrial equipment distributor. We handle full logistics, customs clearance, and delivery to worldwide destinations, ensuring the brake coil reaches your facility reliably.
How to install the CM Brake Coil 51517 on a Lodestar hoist?
To install the CM Brake Coil 51517, first disconnect power to the electric chain hoist. Remove the hoist's brake cover, then replace the old coil with the new one, ensuring proper alignment. Reassemble the cover and test the brake function before resuming operation. Always follow the manufacturer's manual.
Digunakan dalam
Aplikasi umum untuk CMCM Produk
3G Electric memasok CM brake coils for hoists. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
