DAYTON 2 Bolt Flange Bearing: Radial Ball, 5/8 in Bore, Steel, Set Screws
The DAYTON 2 Bolt Flange Bearing is a stamped steel flange-mount radial ball bearing with a 5/8 in cylindrical bore. It features set screws, a rhombus-shaped housing measuring 5 in length by 3 in width, and uses NLGI…
SKU 3G-OTH-98848
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The DAYTON 2 Bolt Flange Bearing is a stamped steel flange-mount radial ball bearing with a 5/8 in cylindrical bore. It features set screws, a rhombus-shaped housing measuring 5 in length by 3 in width, and uses NLGI #2 equivalent lubricant. The mounting bolt size is 7/16 in, and the system of measurement is inch.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is a DAYTON 2 Bolt Flange Bearing used for?
The DAYTON 2 Bolt Flange Bearing supports rotating shafts in industrial machinery, conveyors, and material handling equipment. Its stamped steel rhombus housing with set screws secures the 5/8 in bore radial ball bearing, handling moderate radial loads in tight spaces.
What are the specifications of the DAYTON 1A401 flange bearing?
The DAYTON 1A401 is a 2 bolt flange bearing with a 5/8 in cylindrical bore, stamped steel housing, set screw locking, and NLGI #2 equivalent lubricant. It measures 5 in length by 3 in width, uses a 7/16 in mounting bolt, and is inch-system.
Where to buy a DAYTON 2 Bolt Flange Bearing worldwide?
3G Electric supplies the DAYTON 2 Bolt Flange Bearing (MPN 1A401) worldwide. As a global industrial solutions provider, we handle full logistics, customs clearance, and delivery to your facility. Contact us for pricing and lead time.
How to install a DAYTON stamped steel flange bearing?
Mount the DAYTON flange bearing on a flat surface using 7/16 in bolts through the rhombus holes. Align the 5/8 in shaft with the cylindrical bore, tighten the set screws evenly, and apply NLGI #2 grease if needed. Ensure housing is square to shaft.
Digunakan dalam
Aplikasi umum untuk DaytonDayton Produk
3G Electric memasok Dayton stamped steel flange-mount ball bearings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
