DAYTON 2 Bolt Flange Bearing: Radial Ball, 3/4 in Bore, Steel, Set Screws
The DAYTON 2 Bolt Flange Bearing is a stamped steel flange-mount radial ball bearing with a 3/4 in cylindrical bore. It features set screws, measures 4 1/2 in Lg by 2 1/2 in Wd, and uses NLGI #2 Equivalent lubricant…
SKU 3G-OTH-98888
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The DAYTON 2 Bolt Flange Bearing is a stamped steel flange-mount radial ball bearing with a 3/4 in cylindrical bore. It features set screws, measures 4 1/2 in Lg by 2 1/2 in Wd, and uses NLGI #2 Equivalent lubricant. The mounting bolt size is 7/16 in, and the system of measurement is inch.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the DAYTON 2 Bolt Flange Bearing used for?
The DAYTON 2 Bolt Flange Bearing is used in industrial power transmission systems to support rotating shafts. It is commonly found on conveyors, fans, and material handling equipment where a compact, stamped steel housing with a 3/4 in bore and set-screw locking is required.
What are the specifications of the DAYTON 2 Bolt Flange Bearing?
The DAYTON 2 Bolt Flange Bearing (MPN 4X729) has a 3/4 in cylindrical bore, stamped steel housing, set-screw locking, and measures 4 1/2 in length by 2 1/2 in width. It uses NLGI #2 Equivalent lubricant and requires a 7/16 in mounting bolt. The system of measurement is inch.
Where to buy the DAYTON 2 Bolt Flange Bearing worldwide?
You can source the DAYTON 2 Bolt Flange Bearing through 3G Electric, a global industrial equipment distributor. We handle full logistics, customs clearance, and delivery to worldwide destinations. Contact us for availability and lead time on this part.
How to install the DAYTON 2 Bolt Flange Bearing?
To install the DAYTON 2 Bolt Flange Bearing, first ensure the shaft is clean and free of burrs. Slide the bearing onto the shaft, align the flange bolt holes with the mounting surface, and tighten the 7/16 in bolts evenly. Secure the set screws against the shaft using a hex key. Lubrication is pre-applied with NLGI #2 grease.
Digunakan dalam
Aplikasi umum untuk DaytonDayton Produk
3G Electric memasok Dayton stamped steel flange-mount ball bearings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
