Dayton Nitrile Replacement Impeller/Sleeve Assembly: Mfr Part # 3ABZ9, Buna-N
The DAYTON Nitrile Replacement Impeller/Sleeve Assembly (Mfr Part # 3ABZ9) is a Buna-N impeller/sleeve assembly for dewatering and wastewater pumps. This replacement component is constructed from Buna-N material and…
SKU 3G-OTH-85959
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The DAYTON Nitrile Replacement Impeller/Sleeve Assembly (Mfr Part # 3ABZ9) is a Buna-N impeller/sleeve assembly for dewatering and wastewater pumps. This replacement component is constructed from Buna-N material and is designed for use in compatible pump systems.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the DAYTON Nitrile Replacement Impeller/Sleeve Assembly used for?
The DAYTON Nitrile Replacement Impeller/Sleeve Assembly (Mfr Part # 3ABZ9) is used in dewatering and wastewater pumps to move water and slurry. Its Buna-N construction provides resistance to oils, fuels, and moderate chemicals, making it suitable for industrial sump and construction site dewatering applications.
What are the specifications of the DAYTON 3ABZ9 impeller/sleeve assembly?
The DAYTON 3ABZ9 is a Buna-N (nitrile) impeller/sleeve assembly. Its material is Buna-N, and the product type is an impeller/sleeve assembly. The manufacturer part number is 3ABZ9. This replacement component is designed for use in compatible Dayton dewatering and wastewater pump systems.
Where to buy the DAYTON 3ABZ9 impeller/sleeve assembly worldwide?
You can source the DAYTON 3ABZ9 impeller/sleeve assembly through 3G Electric, a global industrial equipment distributor. We handle full logistics, customs clearance, and delivery to worldwide destinations. Contact us for availability and lead time on this Buna-N replacement part.
How to install the DAYTON 3ABZ9 impeller/sleeve assembly?
To install the DAYTON 3ABZ9 impeller/sleeve assembly, first disconnect pump power and drain fluids. Remove the pump housing, then replace the old assembly with the new Buna-N unit, ensuring proper alignment with the shaft. Reassemble the housing and test for leaks before returning to service. Always consult the pump manual.
Digunakan dalam
Aplikasi umum untuk DaytonDayton Produk
3G Electric memasok Dayton impellers for dewatering & wastewater pumps. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
