Dayton Shaft Collar: 2-Piece, Inch, Round, 1 3/16 in Bore Dia, 2 1/16 in Collar Outside Dia
The DAYTON Shaft Collar (MPN 3ZN80) is a 2-piece steel shaft collar with a 1 3/16 in bore diameter and a 2 1/16 in outside diameter, made from 1045 steel in an inch, round configuration. This product is part of our…
SKU 3G-OTH-160300
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The DAYTON Shaft Collar (MPN 3ZN80) is a 2-piece steel shaft collar with a 1 3/16 in bore diameter and a 2 1/16 in outside diameter, made from 1045 steel in an inch, round configuration. This product is part of our industrial solutions across 14 departments, with specialist depth in power transmission components.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is a DAYTON 2-piece shaft collar used for?
A DAYTON 2-piece shaft collar is used to position and secure components on a shaft, preventing axial movement in industrial machinery. It is commonly applied in conveyors, gearboxes, and material handling equipment where precise component location is required.
What are the specifications of the DAYTON 3ZN80 shaft collar?
The DAYTON 3ZN80 is a 2-piece, inch, round shaft collar with a 1 3/16 in bore diameter and a 2 1/16 in collar outside diameter. It is made from 1045 steel and is designed for inch-size shafts. The manufacturer part number is 3ZN80.
Where to buy a DAYTON 3ZN80 shaft collar worldwide?
You can source the DAYTON 3ZN80 shaft collar through 3G Electric, a global industrial equipment distributor. We handle full logistics, customs clearance, and delivery to worldwide destinations, ensuring the part reaches your facility reliably.
How to install a 2-piece shaft collar?
To install a 2-piece shaft collar, separate the two halves, place them around the shaft at the desired position, then tighten the screws evenly to clamp the collar securely. Ensure the bore aligns with the shaft and avoid over-tightening to prevent damage to the collar or shaft.
Digunakan dalam
Aplikasi umum untuk DaytonDayton Produk
3G Electric memasok Dayton steel shaft collars. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
