DIAMABRUSH Clutch Plate: 5 in Dia
The DIAMABRUSH Clutch Plate (5 in Dia, MPN NP-46) is a plastic clutch plate for buffers, fitting machine sizes 12 in, 13 in, 14 in, 15 in, 16 in, 18 in, and 20 in. 3G Electric interprets demand and delivers this…
SKU 3G-OTH-589410
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The DIAMABRUSH Clutch Plate (5 in Dia, MPN NP-46) is a plastic clutch plate for buffers, fitting machine sizes 12 in, 13 in, 14 in, 15 in, 16 in, 18 in, and 20 in. 3G Electric interprets demand and delivers this genuine industrial part across 14 departments, with specialist depth in combustion, pumps, and controls as an authorised distributor.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the DIAMABRUSH Clutch Plate NP-46 used for?
The DIAMABRUSH Clutch Plate NP-46 is a plastic replacement part for industrial floor buffers. It fits machine sizes from 12 in to 20 in and transmits torque from the motor to the brush, enabling consistent floor cleaning and polishing across commercial and industrial facilities.
What are the specifications of the DIAMABRUSH Clutch Plate NP-46?
The DIAMABRUSH Clutch Plate NP-46 has a 5 in diameter, is made of plastic, and is compatible with buffer machines sized 12 in, 13 in, 14 in, 15 in, 16 in, 18 in, and 20 in. It is a genuine DIAMABRUSH part, MPN NP-46, and cross-references Grainger part 35PP86.
Where to buy the DIAMABRUSH Clutch Plate NP-46 worldwide?
3G Electric supplies the genuine DIAMABRUSH Clutch Plate NP-46 to customers worldwide. As a global industrial solutions provider, we handle full logistics, customs clearance, and delivery to your facility. Contact us to order this part for your buffer.
How to install the DIAMABRUSH Clutch Plate NP-46 on a buffer?
To install the DIAMABRUSH Clutch Plate NP-46, first disconnect the buffer from power. Remove the old clutch plate by loosening the center bolt, then align the new plate's drive pins with the brush driver. Tighten the bolt to the manufacturer's torque specification and test rotation before use.
Digunakan dalam
Aplikasi umum untuk DIAMABRUSHDIAMABRUSH Produk
3G Electric memasok DIAMABRUSH clutch plates. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
