DIAMABRUSH Clutch Plate: 5 in Dia, 12 in_13 in_15 in_16 in_19 in Fits Machine Size
The DIAMABRUSH Clutch Plate (5 in Dia, MPN G-200MM) is a plastic clutch plate for floor machines, fitting machine sizes 12 in, 13 in, 15 in, 16 in, and 19 in. It is compatible with Grainger Part Number 35PP75.
SKU 3G-OTH-589416
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The DIAMABRUSH Clutch Plate (5 in Dia, MPN G-200MM) is a plastic clutch plate for floor machines, fitting machine sizes 12 in, 13 in, 15 in, 16 in, and 19 in. It is compatible with Grainger Part Number 35PP75.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the DIAMABRUSH Clutch Plate G-200MM used for?
The DIAMABRUSH Clutch Plate G-200MM is used to connect the drive motor to the brush or pad driver on floor machines. It fits machine sizes 12 in, 13 in, 15 in, 16 in, and 19 in, enabling reliable power transmission for scrubbing, buffing, and polishing tasks.
What are the specifications of the DIAMABRUSH Clutch Plate G-200MM?
The DIAMABRUSH Clutch Plate G-200MM has a 5 in diameter, is made of plastic, and is designed for floor machines. It fits machine sizes 12 in, 13 in, 15 in, 16 in, and 19 in. The manufacturer part number is G-200MM, and it is compatible with Grainger Part Number 35PP75.
Where to buy the DIAMABRUSH Clutch Plate G-200MM worldwide?
3G Electric supplies the DIAMABRUSH Clutch Plate G-200MM to customers worldwide. As a global industrial solutions provider, we handle full logistics and customs clearance to deliver this clutch plate to your facility. Contact us for availability and lead time.
How to install the DIAMABRUSH Clutch Plate G-200MM on a floor machine?
To install the DIAMABRUSH Clutch Plate G-200MM, first disconnect the floor machine from power. Remove the old clutch plate by loosening the center bolt or retaining ring. Align the new plastic clutch plate with the drive hub, then tighten the fastener to the manufacturer's torque specification. Reconnect power and test.
Digunakan dalam
Aplikasi umum untuk DIAMABRUSHDIAMABRUSH Produk
3G Electric memasok DIAMABRUSH clutch plates. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
