DYNABRADE Contact Arm: 1 in_1/2 in Belt Wd, 30 in Belt Lg, Dynabelter Series, 4 in Wheel Dia
The DYNABRADE Contact Arm (MPN 11682) is a belt sander contact arm for the Dynabelter Series, accepting 1 in to 1/2 in belt widths and a 30 in belt length with a 4 in wheel diameter. It features a radiused profile…
SKU 3G-OTH-158545
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The DYNABRADE Contact Arm (MPN 11682) is a belt sander contact arm for the Dynabelter Series, accepting 1 in to 1/2 in belt widths and a 30 in belt length with a 4 in wheel diameter. It features a radiused profile and rubber construction, with specifications including attr1320326: 11475 and attr1320325: 11682.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the DYNABRADE Contact Arm 11682 used for?
The DYNABRADE Contact Arm 11682 is a belt sander contact arm for the Dynabelter Series. It is used in industrial metalworking and fabrication to guide and tension abrasive belts for grinding, deburring, and finishing. Its radiused profile and rubber wheel suit contoured surfaces.
What are the specifications of the DYNABRADE Contact Arm 11682?
The DYNABRADE Contact Arm 11682 accepts belt widths from 1 in to 1/2 in and a 30 in belt length. It has a 4 in wheel diameter, a radiused profile, and a rubber construction. The manufacturer part number is 11682, and it is part of the Dynabelter Series by DYNABRADE.
Where to buy the DYNABRADE Contact Arm 11682 worldwide?
You can source the DYNABRADE Contact Arm 11682 through 3G Electric, a global industrial equipment distributor. We handle full logistics, customs clearance, and delivery to worldwide destinations. Contact us for availability and lead time; we supply genuine DYNABRADE parts.
How to install the DYNABRADE Contact Arm 11682?
To install the DYNABRADE Contact Arm 11682, first ensure the Dynabelter sander is disconnected from power. Remove the existing arm, align the new arm's mounting holes, and secure with the provided fasteners. Adjust belt tracking per the sander manual. Always wear PPE and follow DYNABRADE's safety guidelines.
Digunakan dalam
Aplikasi umum untuk DYNABRADEDYNABRADE Produk
3G Electric memasok DYNABRADE belt sander contact arms. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.












