DYNABRADE Contact Arm: 1 in Belt Wd, 30 in Belt Lg, Dynabelter Series, 1 in Wheel Dia
The DYNABRADE Contact Arm (MPN 11668) is a belt sander contact arm from the Dynabelter Series, designed for use with 1-inch belt width and 30-inch belt length. It features a 1-inch wheel diameter, a wide rubber…
SKU 3G-OTH-158595
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The DYNABRADE Contact Arm (MPN 11668) is a belt sander contact arm from the Dynabelter Series, designed for use with 1-inch belt width and 30-inch belt length. It features a 1-inch wheel diameter, a wide rubber contact surface, and is compatible with DYNABRADE tools. This component is identified by manufacturer part number 11668.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the DYNABRADE Contact Arm 11668 used for?
The DYNABRADE Contact Arm 11668 is a belt sander contact arm from the Dynabelter Series. It is used for precision sanding and finishing on metal, wood, and composite surfaces, providing a wide rubber contact surface for consistent material removal and contour following.
What are the specifications of the DYNABRADE Contact Arm 11668?
The DYNABRADE Contact Arm 11668 has a 1-inch belt width, 30-inch belt length, and a 1-inch wheel diameter. It features a wide rubber contact surface and is designed for use with DYNABRADE tools. The manufacturer part number is 11668.
Where to buy the DYNABRADE Contact Arm 11668 worldwide?
You can source the DYNABRADE Contact Arm 11668 through 3G Electric, a global industrial equipment distributor. We handle full logistics, customs clearance, and delivery to worldwide destinations, ensuring you receive the correct Dynabelter Series component for your application.
How to install the DYNABRADE Contact Arm 11668?
To install the DYNABRADE Contact Arm 11668, first ensure the tool is disconnected from power. Remove the old arm, align the new arm's mounting holes with the tool, and secure it with the provided hardware. Verify the belt tracks properly before use. Always follow the tool manufacturer's safety guidelines.
Digunakan dalam
Aplikasi umum untuk DYNABRADEDYNABRADE Produk
3G Electric memasok DYNABRADE belt sander contact arms. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
