FSQ Withdrawal Sleeve: AOH3180, AOH3180*380MM, 250 mm Overall Wd, Metric, 380 mm Bore Dia
The FSQ AOH3180 Withdrawal Sleeve is a chrome steel component designed for mounting bearings with a 1:12 taper. It features a 380 mm bore diameter, a 250 mm overall width, and a Tr420x5 metric thread size. This…
SKU 3G-OTH-97044
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The FSQ AOH3180 Withdrawal Sleeve is a chrome steel component designed for mounting bearings with a 1:12 taper. It features a 380 mm bore diameter, a 250 mm overall width, and a Tr420x5 metric thread size. This sleeve is identified by the manufacturer part number AOH3180*380MM and industry number AOH3180.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the FSQ AOH3180 withdrawal sleeve used for?
The FSQ AOH3180 withdrawal sleeve is used to mount bearings with a 1:12 taper onto shafts. It is commonly applied in industrial machinery such as conveyors, crushers, and pumps where secure bearing fit and easy removal are required.
What are the specifications of the FSQ AOH3180 withdrawal sleeve?
The FSQ AOH3180 withdrawal sleeve has a 380 mm bore diameter, 250 mm overall width, and a Tr420x5 metric thread size. It is made of chrome steel and is designed for 1:12 taper bearings. The manufacturer part number is AOH3180*380MM.
Where to buy the FSQ AOH3180 withdrawal sleeve worldwide?
You can source the FSQ AOH3180 withdrawal sleeve through 3G Electric, a global industrial equipment distributor. We handle full logistics, customs clearance, and delivery to worldwide destinations, ensuring the component reaches your facility reliably.
How to install the FSQ AOH3180 withdrawal sleeve?
To install the FSQ AOH3180 withdrawal sleeve, clean the shaft and sleeve bore, then slide the sleeve onto the shaft. Tighten the locknut against the bearing inner ring using the Tr420x5 thread. Ensure the 1:12 taper seats properly for secure mounting.
Digunakan dalam
Aplikasi umum untuk FSQFSQ Produk
3G Electric memasok FSQ withdrawal sleeves. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
