FSQ Withdrawal Sleeve: AOH3184, AOH3184*400MM, 276 mm Overall Wd, Metric, 400 mm Bore Dia
The FSQ AOH3184 Withdrawal Sleeve is a chrome steel component designed for mounting bearings with a 1:12 taper. It features a Tr440x5 thread size and accommodates a 400 mm bore diameter, with an overall width of 276…
SKU 3G-OTH-97060
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The FSQ AOH3184 Withdrawal Sleeve is a chrome steel component designed for mounting bearings with a 1:12 taper. It features a Tr440x5 thread size and accommodates a 400 mm bore diameter, with an overall width of 276 mm. This metric sleeve is identified by the industry number AOH3184 and manufacturer part number AOH3184*400MM.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the FSQ AOH3184 withdrawal sleeve used for?
The FSQ AOH3184 withdrawal sleeve is used to mount bearings with a 1:12 taper onto shafts. It is commonly applied in industrial machinery such as conveyors, crushers, and pumps where secure bearing fit and easy removal are required.
What are the specifications of the FSQ AOH3184 withdrawal sleeve?
The FSQ AOH3184 withdrawal sleeve has a 400 mm bore diameter, 276 mm overall width, and a Tr440x5 thread size. It is made of chrome steel, metric type, with industry number AOH3184 and manufacturer part number AOH3184*400MM.
Where to buy the FSQ AOH3184 withdrawal sleeve worldwide?
You can source the FSQ AOH3184 withdrawal sleeve through 3G Electric, a global industrial equipment distributor. We handle full logistics, customs clearance, and delivery to worldwide destinations, ensuring the sleeve reaches your facility reliably.
How to install the FSQ AOH3184 withdrawal sleeve?
To install the FSQ AOH3184 withdrawal sleeve, clean the shaft and sleeve bore, then slide the sleeve onto the shaft. Use the Tr440x5 thread to draw the sleeve into the bearing bore, ensuring proper seating. Tighten to manufacturer torque specs and verify alignment.
Digunakan dalam
Aplikasi umum untuk FSQFSQ Produk
3G Electric memasok FSQ withdrawal sleeves. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
