FBR variant_2

GAS BURNERS TWO STAGES 071098_A_gb GAS BURNERS TWO STAGES GAS P100/2 CE EVO Gas burners two stages with: aluminum body, air blower at high pressurisation at reverse blades and combustion head with adjustment at high efficiency and high flame stability. Compact overall dimensions and disposition rationalized of the components with accessibility facilitated for the easy setting and maintenance. Available in the versions METHANE (natural gas) or L.P.G. (to specify at the order) on demand specific versions for town gas, coal gas or biogas. Gas train completely assembled, electrically linked and tested; composed by: two stages working valve with flow adjustment, safety valve, minimum gas pressure switch and stabiliser filter of gas pressure. Complete of flange and gasket for installation on generator. Fig. 1 GAS P100/2 CE EVO GAS P100/2 CE EVO  GAS BURNERS TWO STAGES 071098_A_gb TECHNICAL DATA AND OPERATING RANGE DIAGRAM GAS P100/2 CE EVO MODEL GAS P100/2 CE EVO Thermal power min. 1°st. / min. 2°st. - max. 2°st. * [Mcal/h] 172/500-1000 Thermal power min. 1°st. / min. 2°st. - max. 2°st. * [kW] 200/581-1163 Gas flow G20 (NATURAL GAS) min. 1°st. / min. 2°st. - max. 2°st. * [Nm³/h] 20.1/58.3-116.7 Gas flow G25 (NATURAL GAS) min. 1°st. / min. 2°st. - max. 2°st. * [Nm³/h] 23.3/67.8-135.7 Gas flow G25.3 (NATURAL GAS) min. 1°st. / min. 2°st. - max. 2°st. * [Nm³/h] 22.8/66.3-132.7 Gas flow G31 (L.P.G.) min. 1°st. / min. 2°st. - max. 2°st. * [Nm³/h] 7.8/22.5-45.1 Fuel: NATURAL GAS (second family, G20, G25, G25.3) - L.P.G. (third family, G31) Fuel category: I2R,I2H,I2L,I2E,I2E+,I2Er,I2ELL,I2E(R) I3B/P,I3+,I3P,I3B,I3R Intermitted working operation (min. 1 stop every 24 hours) two stages Environmental conditions operation / storage: -15...+40°C / -20...+70°C, rel. humidity max. 80% Max. temperature combustion air [°C] 60 Minimum pressure gas train D1"1/4-S NATURAL GAS/L.P.G. ** [mbar] 93/60 Minimum pressure gas train D1"1/2-S NATURAL GAS/L.P.G. ** [mbar] 42/38 Minimum pressure gas train D2"-S NATURAL GAS/L.P.G. ** [mbar] 32/35 Maximum pressure at the entry of valves (Pe. max) [mbar] 360 Nominal electric power [kW] 1.7 Fan motor [kW] 1.5 Nominal motor current absorption [A] 3.6 Nominal auxiliary absorption [A] 0.7 Power supply: 3~400V, 1/N~230V-50Hz Electric protection degree: IP 40 NOx Class, NATURAL GAS (second family) 1 NOx Class, L.P.G. (third family) 2 Noisiness *** min. - max. [dB(A)] 81-82 Burner weight **** [kg] 44 * Reference conditions: Environment temperature 20°C - Barometric pressure 1013 mbars - Altitude 0 metre (sea level). ** Minimal feeding-gas pressure to the gas train to get the maximum power of the burner, considering counter-pressure in combustion chamber of value 0 (zero). *** Measured sonorous pressure in the laboratory combustion, with functional burner on beta boiler to 1 metre of distance (UNI EN ISO 3746 law - Control method class 3 - The measured sound pressure tolerance can be assumed to be ± 1 [dB (A)]). **** For burner with long head add 2 kg to the weight. GAS P100/2 CE EVO  GAS BURNERS TWO STAGES 071098_A_gb ΀ŵďĂƌ΁ 18 ' '^WϭϬϬͬϮsK DWK/>sKZK ϭϭϲϯ ϳ͘ϱ ϭϮϲϵ ϳ͘ϴ 16ϵϴϴ ϭϮ͘ϱ ϭϬϳϴ ϭϯ͘ϴ ϱϴϭ ϭϰ͘ϱ ϲϯϰ ϭϲ ϮϬϬ ϭ͘ϱ ϮϬϬ Ϭ ϭϭϲϯ ϳ͘ϱ 14ϯϴϯ Ϭ ϯϴϯ Ϭ͘ϰ ϱϴϭ Ϭ ϭϭϲϯ Ϭ ϵϴϴ ϭϮ͘ϱ ϭϭϲϯ ϳ͘ϱ ϯϮϱ ϭ͘Ϯ 12 10 8 6 4 2 0 Fig. 2 X400 = Thermal power 0 200 600Y = Pression in the combustion 800 chamber 1000 1200 1400 ;kW= The firing rates has been obtained based on test boilers in accordance with EN267 standards and are indicative of matching the burner to the boiler. For the correct operation of the burner, combustion chamber dimensions must be in accordance with current regulation. In case of non-compliance, contact the manufacturer. DIMENSIONS [MM] 290 140 280 O 185 266 25 510 240 294 181 B 380 TC - TL 764 A ' Fig. 3 Dimensions GAS TRAIN A B D1"1/4-S 437 382* D1"1/2-S 458 396 D2"-S 458 396 * Includes length of 66 mm due to adapter code 057020 TC - TL: Please see chapter "Flame tube length" GAS P100/2 CE EVO  GAS BURNERS TWO STAGES 071098_A_gb BOILER PLATE The dimensions of the boiler plate must be as indicated in the drawing. * Suggested dimension of connection between burner and generator. MODEL L min L* L max M N min N max GAS P100/2 CE EVO mm 195 195 250 M12 275 325 FLAME TUBE LENGTH Flame tube length must be selected based on the specifications supplied by boiler manufacturer and, in any case, it must be greater than the thickness of the boiler door included its insulation. In case of boilers with flame inversion or front flue combustion chambers, it is necessary to insulate the area between the flame tube and front door with refractory material. This protection material must not impede flame tube extraction. FLAME TUBE LENGTH TC mm 252 TL mm 387 * * For different flame lengths, please contact our Technical-Sales Department. GAS P100/2 CE EVO  GAS BURNERS TWO STAGES 071098_A_gb BURNER SIGNAL DESCRIPTION In the picture below there are indicated all the signalation present on the burner: 2 1 V V Fig. 4 Burner signal description LEGEND 1) ON/OFF button 2) Reset from lockout button + status lamp The multicolor signal lamp in the lockout reset button (pos.2) is the key indicating element for visual diagnostics and interface diagnostics. In normal operation, the different operating states are indicated in the form of color codes; please refer to electrical device handbook supplied with the present instructions. After a non-alterable lockout, the red signal lamp in the lockout reset button (pos.2) lights up. By pressing the lockout reset button (pos.2) for more than 3 seconds, the visual diagnostics of the cause of fault can be activated; please refer to electrical device handbook supplied with the present instructions. For close the diagnostics mode and for switch on the burner again, it is necessary to reset the burner control. Press the lockout reset button (pos.2) for about 1 second (<3 seconds). After a non-alterable lockout, the red signal lamp in the lockout reset button (pos.2) lights up. For reset the control box press the lockout reset button (pos.2) for about 1 second (<3 seconds). GAS P100/2 CE EVO  GAS BURNERS TWO STAGES 071098_A_gb PRODUCT SPECIFICATION SHORT DESCRIPTION Gas burners two stages. DETAILED SPECIFICATION Gas burner two stages composed by: • Aluminum body; • Fan at high pressurisationwith reverse blades; • Combustion head with adjustment at high performance and elevated flame stability equipped with inox steel blast tube and inox steel flame disc; • Flange and insulating gasket for fixing at…