GREENLEE Knockout Draw Stud: 10 ga Max Sheet Metal Capacity-Steel, 3 7/8 in Lg
The GREENLEE Knockout Draw Stud (MPN 7212SP14) is a draw stud for the Greenlee QuickDraw Manual-Hydraulic system, designed for sheet metal up to 10 ga max capacity in steel. It measures 3 7/8 inches in length with a…
SKU 3G-OTH-313680
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The GREENLEE Knockout Draw Stud (MPN 7212SP14) is a draw stud for the Greenlee QuickDraw Manual-Hydraulic system, designed for sheet metal up to 10 ga max capacity in steel. It measures 3 7/8 inches in length with a 3/8-inch draw stud diameter.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the GREENLEE Knockout Draw Stud 7212SP14 used for?
The GREENLEE Knockout Draw Stud 7212SP14 is used with the Greenlee QuickDraw Manual-Hydraulic system to create clean holes in sheet metal. It is designed for steel up to 10 ga maximum capacity, making it suitable for electrical panel fabrication and industrial enclosure work.
What are the specifications of the GREENLEE 7212SP14 draw stud?
The GREENLEE 7212SP14 draw stud has a length of 3 7/8 inches and a draw stud diameter of 3/8 inch. It is part of the Greenlee QuickDraw Manual-Hydraulic system and is rated for sheet steel up to 10 ga maximum capacity. The manufacturer part number is 7212SP14.
Where to buy GREENLEE 7212SP14 draw studs worldwide?
You can source the GREENLEE 7212SP14 draw stud worldwide through 3G Electric. As a global industrial equipment distributor, 3G Electric handles full logistics, customs clearance, and delivery to your location. Contact us for availability and lead time.
How to install the GREENLEE QuickDraw draw stud?
To install the GREENLEE 7212SP14 draw stud, thread it into the Greenlee QuickDraw Manual-Hydraulic punch driver. Ensure the draw stud is fully seated and the sheet metal is aligned. Apply hydraulic pressure gradually to punch the hole. Always follow Greenlee's safety guidelines for proper operation.
Digunakan dalam
Aplikasi umum untuk GREENLEEGREENLEE Produk
3G Electric memasok GREENLEE greenlee knockout punch draw studs, sleeve adapters, & locks. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
