GREENLEE Stud: 10 ga Max Sheet Metal Capacity-Steel, 5 1/2 in Lg
The GREENLEE Draw Stud (MPN 29452) is a knockout punch draw stud designed for use with the Greenlee Manual-Hydraulic 746 or 746A Ram. It has a 10 ga max sheet metal capacity in steel, a 5 1/2 in length, and a 3/4 in…
SKU 3G-OTH-313692
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The GREENLEE Draw Stud (MPN 29452) is a knockout punch draw stud designed for use with the Greenlee Manual-Hydraulic 746 or 746A Ram. It has a 10 ga max sheet metal capacity in steel, a 5 1/2 in length, and a 3/4 in draw stud diameter.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the GREENLEE 29452 draw stud used for?
The GREENLEE 29452 draw stud is used with Greenlee Manual-Hydraulic 746 or 746A rams to pull knockout punches through sheet metal. It handles steel up to 10 ga max capacity, making it essential for electrical enclosure fabrication and panel building where clean, accurate holes are required.
What are the specifications of the GREENLEE 29452 draw stud?
The GREENLEE 29452 draw stud has a 5 1/2 in length and a 3/4 in draw stud diameter. It is designed for use with Greenlee Manual-Hydraulic 746 or 746A rams and supports a 10 ga max sheet metal capacity in steel. The manufacturer part number is 29452.
Where to buy the GREENLEE 29452 draw stud worldwide?
3G Electric supplies the GREENLEE 29452 draw stud to customers worldwide. As a global industrial solutions provider, we handle full logistics, customs clearance, and delivery to your site. Contact us for availability and lead time on this knockout punch draw stud.
How to install the GREENLEE 29452 draw stud on a knockout punch?
To install the GREENLEE 29452 draw stud, thread it into the Greenlee Manual-Hydraulic 746 or 746A ram until snug. Ensure the draw stud diameter matches the punch driver. Always follow the ram manufacturer's instructions for proper alignment and hydraulic pressure to avoid damaging the stud or workpiece.
Digunakan dalam
Aplikasi umum untuk GREENLEEGREENLEE Produk
3G Electric memasok GREENLEE greenlee knockout punch draw studs, sleeve adapters, & locks. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
