GRUVLOK Clamp Coupling: Clamp Tee, 5 in x 5 in x 3 in, EPDM Seal, 500 psi, Ductile Iron
The GRUVLOK Clamp Coupling: Clamp Tee is a threaded outlet pipe clamp with a 5 in x 5 in x 3 in configuration, featuring an EPDM seal, ductile iron construction, and bolted design. It has a maximum operating pressure…
SKU 3G-OTH-459248
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The GRUVLOK Clamp Coupling: Clamp Tee is a threaded outlet pipe clamp with a 5 in x 5 in x 3 in configuration, featuring an EPDM seal, ductile iron construction, and bolted design. It has a maximum operating pressure of 500 psi (MPN 0390175552).
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the GRUVLOK Clamp Coupling Clamp Tee used for?
The GRUVLOK Clamp Coupling Clamp Tee connects and branches pipe runs in fire protection, HVAC, and industrial piping systems. Its 5 in x 5 in x 3 in configuration with threaded outlet allows easy takeoff for smaller lines, using a bolted ductile iron design rated to 500 psi.
What are the specifications of the GRUVLOK Clamp Coupling 0390175552?
This GRUVLOK Clamp Tee has a 5 in x 5 in x 3 in configuration, EPDM seal, ductile iron construction, bolted design, and a maximum operating pressure of 500 psi. The manufacturer part number is 0390175552. It is a threaded outlet pipe clamp for grooved-end piping systems.
Where to buy the GRUVLOK Clamp Coupling 0390175552 worldwide?
3G Electric supplies the GRUVLOK Clamp Coupling 0390175552 to customers worldwide. We handle full logistics, customs clearance, and delivery to your site. Contact us for a quote and lead time on this ductile iron clamp tee with EPDM seal.
How to install a GRUVLOK Clamp Tee?
Installation follows standard grooved coupling procedures: lubricate the EPDM gasket, place it over the pipe ends, position the clamp tee housing, and tighten the bolts evenly to the torque specified by GRUVLOK. Ensure pipe ends are clean and properly grooved before assembly.
Digunakan dalam
Aplikasi umum untuk GRUVLOKGRUVLOK Produk
3G Electric memasok GRUVLOK threaded outlet pipe clamps. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.









