GRUVLOK Clamp Coupling: Clamp Tee, 2 in x 2 in x 1 1/2 in, EPDM Seal, 500 psi, Ductile Iron
The GRUVLOK Clamp Coupling: Clamp Tee is a threaded outlet pipe clamp with a 2 in x 2 in x 1 1/2 in configuration, featuring an EPDM seal and a bolted ductile iron design rated for a maximum operating pressure of 500…
SKU 3G-OTH-459227
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The GRUVLOK Clamp Coupling: Clamp Tee is a threaded outlet pipe clamp with a 2 in x 2 in x 1 1/2 in configuration, featuring an EPDM seal and a bolted ductile iron design rated for a maximum operating pressure of 500 psi. 3G Electric interprets this demand and delivers this genuine industrial component, backed by specialist expertise in pumps and controls, across 14 industrial departments.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the GRUVLOK Clamp Coupling Clamp Tee used for?
The GRUVLOK Clamp Tee is used in fire protection, HVAC, and industrial piping systems to create a threaded branch outlet from a main pipe run. Its bolted ductile iron design with EPDM seal handles up to 500 psi, making it suitable for water and other compatible fluids.
What are the specifications of the GRUVLOK Clamp Tee 0390175040?
This GRUVLOK Clamp Tee has a 2 in x 2 in x 1 1/2 in configuration, EPDM seal, bolted ductile iron construction, and a maximum operating pressure of 500 psi. The manufacturer part number is 0390175040. It is a threaded outlet pipe clamp for grooved-end piping systems.
Where to buy the GRUVLOK Clamp Tee 0390175040 worldwide?
3G Electric supplies the genuine GRUVLOK Clamp Tee 0390175040 to customers worldwide. We handle full logistics, customs clearance, and delivery to your site. Contact our team to place an order for this 2 in x 2 in x 1 1/2 in threaded outlet pipe clamp.
How to install a GRUVLOK Clamp Tee?
Installation requires clean, properly grooved pipe ends. Lubricate the EPDM gasket and position it over the pipe ends. Place the GRUVLOK clamp tee over the gasket, insert bolts, and tighten nuts evenly to the manufacturer's torque specification. Always follow GRUVLOK's published installation instructions for safe operation.
Digunakan dalam
Aplikasi umum untuk GRUVLOKGRUVLOK Produk
3G Electric memasok GRUVLOK threaded outlet pipe clamps. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.





