GRUVLOK Clamp Coupling: Bolted Clamp Tee, 6 in x 6 in x 1 1/4 in, Ductile Iron
The GRUVLOK Bolted Clamp Tee is a ductile-iron outlet pipe clamp with an NBR seal, rated for 500 psi maximum operating pressure. It accommodates a 6 in x 6 in x 1-1/4 in fitting pipe size (MPN 0390174563). 3G…
SKU 3G-OTH-466155
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The GRUVLOK Bolted Clamp Tee is a ductile-iron outlet pipe clamp with an NBR seal, rated for 500 psi maximum operating pressure. It accommodates a 6 in x 6 in x 1-1/4 in fitting pipe size (MPN 0390174563). 3G Electric interprets this demand and delivers the genuine GRUVLOK coupling across 14 industrial departments — with specialist depth in pumps and controls as an authorised distributor.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the GRUVLOK Bolted Clamp Tee used for?
The GRUVLOK Bolted Clamp Tee is used in fire protection, HVAC, and industrial piping systems to create a branch connection from a 6-inch main line to a 1-1/4-inch outlet. Its ductile-iron construction and NBR seal handle pressures up to 500 psi in water or light oil applications.
What are the specifications of the GRUVLOK 0390174563 clamp coupling?
This GRUVLOK clamp coupling has a fitting pipe size of 6 in x 6 in x 1-1/4 in, a maximum operating pressure of 500 psi, and is made of ductile iron with an NBR seal. The manufacturer part number is 0390174563. It is a bolted clamp tee for outlet pipe clamping.
Where to buy GRUVLOK clamp couplings worldwide?
3G Electric supplies genuine GRUVLOK clamp couplings worldwide, handling full logistics and customs clearance. As a global industrial solutions provider, we source and deliver this bolted clamp tee across 14 departments, including pumps and controls, to any international destination.
How to install a GRUVLOK bolted clamp tee?
To install a GRUVLOK bolted clamp tee, ensure pipe ends are clean and lubricate the NBR seal. Position the clamp over the joint, insert bolts, and tighten nuts evenly to the manufacturer's torque specification. Always verify alignment and pressure rating before system pressurization.
Digunakan dalam
Aplikasi umum untuk GRUVLOKGRUVLOK Produk
3G Electric memasok GRUVLOK outlet pipe clamps. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.








