GRUVLOK Clamp Coupling: Clamp Tee, 2 in x 2 in x 1 in, Ductile Iron, EPDM Seal
The GRUVLOK Clamp Coupling: Clamp Tee is a 2 in x 2 in x 1 in outlet pipe clamp made of ductile iron with an EPDM seal, rated for a maximum operating pressure of 300 psi at 150° F (MPN 0390171023). 3G Electric…
SKU 3G-OTH-466184
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The GRUVLOK Clamp Coupling: Clamp Tee is a 2 in x 2 in x 1 in outlet pipe clamp made of ductile iron with an EPDM seal, rated for a maximum operating pressure of 300 psi at 150° F (MPN 0390171023). 3G Electric sources this genuine GRUVLOK fitting across 14 industrial departments, with specialist expertise in combustion, pumps and controls ensuring the right solution for your piping system.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is a GRUVLOK clamp tee used for?
A GRUVLOK clamp tee connects three pipes in a grooved piping system, typically in fire protection, HVAC, or industrial process lines. This 2 in x 2 in x 1 in ductile iron fitting with EPDM seal handles up to 300 psi at 150° F, providing a reliable branch connection.
What are the specifications of the GRUVLOK 0390171023 clamp coupling?
The GRUVLOK 0390171023 is a 2 in x 2 in x 1 in clamp tee made of ductile iron with an EPDM seal. It has a maximum operating pressure of 300 psi at 150° F. The fitting pipe size is 2 in x 2 in x 1 in, and it is designed for grooved-end pipe connections.
Where to buy GRUVLOK clamp tee 0390171023 worldwide?
3G Electric supplies the genuine GRUVLOK 0390171023 clamp tee worldwide. As a global industrial solutions provider, we handle full logistics and customs clearance to deliver this ductile iron fitting with EPDM seal to your facility, ensuring compliance with your piping system requirements.
How to install a GRUVLOK clamp tee?
Installation requires aligning the grooved pipe ends, placing the clamp tee over the joints, and tightening the bolts evenly to the manufacturer's torque specification. Ensure the EPDM seal is properly seated and lubricated if needed. Always follow GRUVLOK's published installation instructions for safe operation at 300 psi.
Digunakan dalam
Aplikasi umum untuk GRUVLOKGRUVLOK Produk
3G Electric memasok GRUVLOK outlet pipe clamps. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.







