GRUVLOK Clamp Coupling: Bolted Clamp Tee, 6 in x 6 in x 2 in, Ductile Iron, NBR Seal
The GRUVLOK Clamp Coupling: Bolted Clamp Tee (MPN 0390174639) is a 6 in x 6 in x 2 in outlet pipe clamp made of ductile iron with an NBR seal, rated for a maximum operating pressure of 500 psi. This bolted clamp tee…
SKU 3G-OTH-466121
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The GRUVLOK Clamp Coupling: Bolted Clamp Tee (MPN 0390174639) is a 6 in x 6 in x 2 in outlet pipe clamp made of ductile iron with an NBR seal, rated for a maximum operating pressure of 500 psi. This bolted clamp tee is designed for industrial piping systems requiring a reliable branch connection.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is a GRUVLOK bolted clamp tee used for?
A GRUVLOK bolted clamp tee creates a branch connection in industrial piping systems. It joins a 6-inch main line to a 2-inch outlet, handling pressures up to 500 psi. Common in fire protection, HVAC, and process piping where reliable, leak-resistant joints are needed.
What are the specifications of the GRUVLOK 0390174639 clamp tee?
The GRUVLOK 0390174639 is a 6 in x 6 in x 2 in bolted clamp tee made of ductile iron with an NBR seal. It has a maximum operating pressure of 500 psi. This fitting is designed for grooved-end pipe connections in industrial and commercial systems.
Where to buy a GRUVLOK 6 in x 6 in x 2 in clamp tee worldwide?
3G Electric supplies the GRUVLOK 0390174639 bolted clamp tee to customers worldwide. We handle full logistics, customs clearance, and delivery to your site. Contact our team for a quote and lead time on this ductile iron fitting rated for 500 psi.
How to install a GRUVLOK bolted clamp tee?
Installation follows standard grooved coupling procedures: ensure pipe ends are clean and properly grooved, lubricate the NBR gasket, position the clamp tee over the joint, and tighten bolts evenly to the manufacturer's torque specification. Always verify alignment before pressurizing the system.
Digunakan dalam
Aplikasi umum untuk GRUVLOKGRUVLOK Produk
3G Electric memasok GRUVLOK outlet pipe clamps. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.








