GRUVLOK Clamp Coupling: Bolted Clamp Tee, 4 in x 4 in x 1 in, Ductile Iron, NBR Seal
The GRUVLOK Clamp Coupling is a bolted clamp tee outlet pipe fitting in ductile iron with an NBR seal, sized 4 in x 4 in x 1 in and rated for a maximum operating pressure of 500 psi (MPN 0390172211). 3G Electric…
SKU 3G-OTH-466148
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The GRUVLOK Clamp Coupling is a bolted clamp tee outlet pipe fitting in ductile iron with an NBR seal, sized 4 in x 4 in x 1 in and rated for a maximum operating pressure of 500 psi (MPN 0390172211). 3G Electric interprets this demand and sources the genuine GRUVLOK part, backed by specialist depth in pumps and controls across 14 industrial departments.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is a GRUVLOK bolted clamp tee used for?
A GRUVLOK bolted clamp tee connects branch piping to a main run in grooved-end fire protection, HVAC, or industrial water systems. The 4 in x 4 in x 1 in ductile-iron fitting with NBR seal handles up to 500 psi, enabling reliable takeoffs for sprinklers, drains, or instrumentation lines.
What are the specifications of the GRUVLOK 0390172211 clamp coupling?
The GRUVLOK 0390172211 is a bolted clamp tee outlet pipe clamp. It has a fitting pipe size of 4 in x 4 in x 1 in, is made of ductile iron with an NBR seal, and is rated for a maximum operating pressure of 500 psi. It is designed for grooved-end piping systems.
Where to buy GRUVLOK clamp couplings worldwide?
3G Electric supplies genuine GRUVLOK clamp couplings worldwide. We handle full logistics, customs clearance, and delivery to your site. As a global industrial solutions provider with specialist depth in pumps and controls, we source the correct GRUVLOK part for your application and coordinate international shipping.
How to install a GRUVLOK bolted clamp tee?
Install a GRUVLOK bolted clamp tee by ensuring pipe ends are clean, grooved, and lubricated per manufacturer guidelines. Position the tee over the prepared pipe ends, insert the gasket, and tighten the bolts evenly to the torque specified by GRUVLOK. Always follow the fitting's pressure rating of 500 psi and applicable piping codes.
Digunakan dalam
Aplikasi umum untuk GRUVLOKGRUVLOK Produk
3G Electric memasok GRUVLOK outlet pipe clamps. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.









