GRUVLOK Clamp Coupling: Bolted Clamp Tee, 4 in x 4 in x 3/4 in, Ductile Iron, NBR Seal
The GRUVLOK Bolted Clamp Tee is a 4 in x 4 in x 3/4 in outlet pipe clamp coupling made of ductile iron with an NBR seal, rated for a maximum operating pressure of 500 psi (MPN 0390172203). 3G Electric sources this…
SKU 3G-OTH-466149
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The GRUVLOK Bolted Clamp Tee is a 4 in x 4 in x 3/4 in outlet pipe clamp coupling made of ductile iron with an NBR seal, rated for a maximum operating pressure of 500 psi (MPN 0390172203). 3G Electric sources this genuine GRUVLOK fitting across 14 industrial departments — and far more — with specialist depth in combustion, pumps and controls as an authorised distributor.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is a GRUVLOK bolted clamp tee used for?
A GRUVLOK bolted clamp tee connects branch piping to a main run in grooved-end fire protection, HVAC, and industrial water systems. This 4 in x 4 in x 3/4 in ductile-iron fitting with an NBR seal handles up to 500 psi. 3G Electric supplies this genuine GRUVLOK component across 14 industrial departments.
What are the specifications of the GRUVLOK 0390172203?
The GRUVLOK 0390172203 is a bolted clamp tee with a 4 in x 4 in x 3/4 in fitting pipe size. It is made of ductile iron with an NBR seal and rated for a maximum operating pressure of 500 psi. 3G Electric sources this genuine GRUVLOK fitting for global industrial applications.
Where to buy a GRUVLOK bolted clamp tee worldwide?
3G Electric supplies the genuine GRUVLOK bolted clamp tee (MPN 0390172203) worldwide. As a global industrial solutions provider, we handle full logistics and customs clearance for delivery to any country. Contact us to order this 4 in x 4 in x 3/4 in ductile-iron fitting rated for 500 psi.
How to install a GRUVLOK bolted clamp tee?
Installation follows standard grooved-pipe practices: lubricate the NBR gasket, slide it over the pipe ends, position the tee, and tighten the bolts evenly to the torque specified by GRUVLOK. Ensure pipe ends are clean and free of debris. 3G Electric provides sourcing support for this fitting across 14 industrial departments.
Digunakan dalam
Aplikasi umum untuk GRUVLOKGRUVLOK Produk
3G Electric memasok GRUVLOK outlet pipe clamps. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.








