GRUVLOK Clamp Coupling: Bolted Clamp Tee, 4 in x 4 in x 3 in, Ductile Iron, NBR Seal
The GRUVLOK Clamp Coupling is a bolted clamp tee outlet pipe fitting in ductile iron with an NBR seal, sized 4 in x 4 in x 3 in and rated for a maximum operating pressure of 500 psi (MPN 0390174415). 3G Electric…
SKU 3G-OTH-466158
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The GRUVLOK Clamp Coupling is a bolted clamp tee outlet pipe fitting in ductile iron with an NBR seal, sized 4 in x 4 in x 3 in and rated for a maximum operating pressure of 500 psi (MPN 0390174415). 3G Electric interprets this demand and delivers the genuine GRUVLOK part, backed by specialist expertise across 14 industrial departments — including combustion, pumps, and controls — to ensure you get the right solution, not just a catalog listing.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the GRUVLOK 4 in x 4 in x 3 in bolted clamp tee used for?
The GRUVLOK bolted clamp tee is a ductile-iron pipe fitting used to create a branch outlet in grooved-end piping systems. It is rated for 500 psi and is common in fire protection, HVAC, and industrial water lines where a reliable, leak-resistant mechanical joint is required.
What are the specifications of the GRUVLOK clamp coupling MPN 0390174415?
This GRUVLOK clamp coupling is a bolted clamp tee with fitting pipe size 4 in x 4 in x 3 in. It is made of ductile iron with an NBR seal and has a maximum operating pressure of 500 psi. The manufacturer part number is 0390174415.
Where to buy GRUVLOK pipe fittings in worldwide?
3G Electric supplies genuine GRUVLOK pipe fittings worldwide. We handle full logistics, customs clearance, and delivery to your site. As a global industrial solutions provider, we source the correct part — such as the 4 in x 4 in x 3 in bolted clamp tee — and support you from quote through delivery.
How to install a GRUVLOK bolted clamp tee?
Installation requires clean, properly grooved pipe ends. Lubricate the NBR gasket and position it over the pipe ends. Place the ductile-iron clamp housing over the gasket, insert bolts, and tighten evenly to the torque specified by GRUVLOK. Always follow the manufacturer's instructions for pressure ratings and bolt torque.
Digunakan dalam
Aplikasi umum untuk GRUVLOKGRUVLOK Produk
3G Electric memasok GRUVLOK outlet pipe clamps. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.









