GRUVLOK Clamp Coupling: Clamp Tee, 3 in x 1 1/2 in x 2 in, Ductile Iron, EPDM Seal
The GRUVLOK Clamp Tee is a 3 in x 1-1/2 in x 2 in outlet pipe clamp coupling made of ductile iron with an EPDM seal, rated for 300 psi at 150° F (MPN 0390171163). 3G Electric interprets demand for this fitting across…
SKU 3G-OTH-466143
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The GRUVLOK Clamp Tee is a 3 in x 1-1/2 in x 2 in outlet pipe clamp coupling made of ductile iron with an EPDM seal, rated for 300 psi at 150° F (MPN 0390171163). 3G Electric interprets demand for this fitting across 14 industrial departments — and we supply far more than is listed — with specialist depth in combustion, pumps and controls as an authorised distributor for brands including GRUVLOK, ensuring the right answer for your piping system.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is a GRUVLOK Clamp Tee used for?
A GRUVLOK Clamp Tee is a ductile-iron outlet pipe clamp coupling used to branch a 1-1/2 in or 2 in line from a 3 in main in grooved-end piping systems. It is common in fire protection, HVAC, and industrial process lines where a reliable, leak-tight joint is required at up to 300 psi @ 150° F.
What are the specifications of the GRUVLOK Clamp Tee 0390171163?
The GRUVLOK Clamp Tee (MPN 0390171163) is a 3 in x 1-1/2 in x 2 in outlet pipe clamp coupling. It is made of ductile iron with an EPDM seal and rated for a maximum operating pressure of 300 psi @ 150° F. The fitting pipe size is 3 in x 1-1/2 in x 2 in.
Where to buy a GRUVLOK Clamp Tee worldwide?
3G Electric supplies the GRUVLOK Clamp Tee (MPN 0390171163) worldwide. As a global industrial solutions provider, we handle full logistics, customs clearance, and delivery to your site. Contact us for a quote and lead time on this ductile-iron outlet pipe clamp coupling.
How to install a GRUVLOK Clamp Tee?
To install a GRUVLOK Clamp Tee, ensure pipe ends are clean and grooved per GRUVLOK specifications. Lubricate the EPDM gasket, place it over the pipe ends, and position the clamp housing. Tighten bolts evenly to the torque recommended by GRUVLOK. Always follow the manufacturer's installation instructions for a leak-tight joint.
Digunakan dalam
Aplikasi umum untuk GRUVLOKGRUVLOK Produk
3G Electric memasok GRUVLOK outlet pipe clamps. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
