GRUVLOK Clamp Coupling: Clamp Tee, 3 in x 3 in x 2 in, Ductile Iron, EPDM Seal
The GRUVLOK Clamp Tee is a 3 in x 3 in x 2 in outlet pipe clamp coupling made of ductile iron with an EPDM seal, rated for a maximum operating pressure of 300 psi at 150° F (MPN 0390173243). 3G Electric sources this…
SKU 3G-OTH-466099
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The GRUVLOK Clamp Tee is a 3 in x 3 in x 2 in outlet pipe clamp coupling made of ductile iron with an EPDM seal, rated for a maximum operating pressure of 300 psi at 150° F (MPN 0390173243). 3G Electric sources this genuine industrial fitting as part of our broader capability across 14 departments, with specialist depth in combustion, pumps and controls.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the GRUVLOK Clamp Tee used for?
The GRUVLOK Clamp Tee is a ductile-iron outlet pipe clamp coupling used to branch a 2-inch line from a 3-inch main in grooved-end piping systems. It is common in fire protection, HVAC, and industrial process applications where a reliable, leak-tight joint is required at pressures up to 300 psi at 150° F.
What are the specifications of the GRUVLOK Clamp Tee?
The GRUVLOK Clamp Tee (MPN 0390173243) is a 3 in x 3 in x 2 in fitting made of ductile iron with an EPDM seal. It has a maximum operating pressure of 300 psi at 150° F. The 3-inch run and 2-inch outlet allow branch connections in grooved piping systems.
Where to buy the GRUVLOK Clamp Tee worldwide?
3G Electric supplies the genuine GRUVLOK Clamp Tee (MPN 0390173243) to customers worldwide. As a global industrial sourcing partner, we handle full logistics and customs clearance to deliver this ductile-iron fitting to your site. Contact us for a quote and delivery timeline.
How to install a GRUVLOK Clamp Tee?
Install the GRUVLOK Clamp Tee by lubricating the EPDM gasket and sliding it over the grooved pipe ends. Position the clamp housing over the gasket, insert bolts, and tighten nuts evenly to the manufacturer’s torque specification. Always verify alignment and pressure rating before system pressurization.
Digunakan dalam
Aplikasi umum untuk GRUVLOKGRUVLOK Produk
3G Electric memasok GRUVLOK outlet pipe clamps. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.









