INA 4 Bolt Flange Bearing: Radial Ball, 30 mm Bore, Cast Iron, Set Screws
The INA 4 Bolt Flange Bearing is a general purpose flange-mount ball bearing with a 30 mm cylindrical bore, cast iron housing, and set screw locking. It is not split, uses lithium complex grease, and accepts M10…
SKU 3G-OTH-110085
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The INA 4 Bolt Flange Bearing is a general purpose flange-mount ball bearing with a 30 mm cylindrical bore, cast iron housing, and set screw locking. It is not split, uses lithium complex grease, and accepts M10 mounting bolts. This metric unit (MPN PMEY30-XL-N) measures 125 mm in length and 19 mm in width.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the INA 4 Bolt Flange Bearing PMEY30-XL-N used for?
This INA general purpose flange-mount ball bearing supports rotating shafts in industrial machinery, conveyors, and material handling equipment. Its 30 mm bore and cast iron housing with set screw locking provide reliable radial load support in metric applications.
What are the specifications of the INA PMEY30-XL-N flange bearing?
The INA PMEY30-XL-N has a 30 mm cylindrical bore, cast iron housing, set screw locking, and M10 mounting bolts. It is not split, uses lithium complex grease, and measures 125 mm length by 19 mm width. This is a metric unit from INA.
Where to buy the INA 4 Bolt Flange Bearing PMEY30-XL-N worldwide?
3G Electric supplies the INA PMEY30-XL-N flange bearing to customers worldwide. We handle full logistics, customs clearance, and delivery to your site. Contact us for a quote and lead time on this metric unit.
How to install the INA PMEY30-XL-N flange bearing?
Mount the INA PMEY30-XL-N on a flat surface using M10 bolts through the four flange holes. Align the shaft with the 30 mm bore, tighten the set screws evenly to lock the shaft, and apply lithium complex grease per INA recommendations before operation.
Digunakan dalam
Aplikasi umum untuk INAINA Produk
3G Electric memasok INA general purpose flange-mount ball bearings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
