INA 4 Bolt Flange Bearing: Radial Ball, 45 mm Bore, Cast Iron, Set Screws
The INA 4 Bolt Flange Bearing is a general purpose flange-mount ball bearing with a 45 mm cylindrical bore, cast iron housing, and set screw locking. It is not split, uses lithium complex grease, and accepts M12…
SKU 3G-OTH-117887
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The INA 4 Bolt Flange Bearing is a general purpose flange-mount ball bearing with a 45 mm cylindrical bore, cast iron housing, and set screw locking. It is not split, uses lithium complex grease, and accepts M12 mounting bolts. This metric unit (MPN PMEY45-XL) measures 155 mm in length and 28.5 mm in width.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the INA 4 Bolt Flange Bearing used for?
The INA 4 Bolt Flange Bearing is a general purpose flange-mount ball bearing used to support rotating shafts in industrial machinery, conveyors, and material handling equipment. Its cast iron housing and set screw locking provide reliable shaft retention in moderate-load applications.
What are the specifications of the INA PMEY45-XL flange bearing?
The INA PMEY45-XL is a metric 4 bolt flange bearing with a 45 mm cylindrical bore, cast iron housing, and set screw locking. It uses lithium complex grease, accepts M12 mounting bolts, and measures 155 mm length by 28.5 mm width. The housing is not split.
Where to buy INA flange bearings worldwide?
3G Electric supplies INA flange bearings worldwide. As a global industrial distributor, we handle full logistics, customs clearance, and delivery to your site. Contact us for availability and lead time on the INA PMEY45-XL or other INA bearing models.
How to install an INA 4 bolt flange bearing?
To install the INA 4 bolt flange bearing, first clean the shaft and housing bore. Slide the bearing onto the shaft, align the flange bolt holes with the mounting surface, and tighten M12 bolts evenly. Secure the shaft by tightening the set screws against the shaft. Apply lithium complex grease per manufacturer intervals.
Digunakan dalam
Aplikasi umum untuk INAINA Produk
3G Electric memasok INA general purpose flange-mount ball bearings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
