Kami mengirim ke Indonesia — pintu ke pintu, bea cukai dan logistik ditangani oleh 3G Electric

3G Electric
Keranjang Permintaan PenawaranMinta PenawaranMasukDaftar
JW WINCO M8 Stainless Steel Quick-Release Pivot Hoist Ring - Corrosion-Resistant Quick-Release Threaded Pivot-Only Hoist Rings
JW WINCOCorrosion-Resistant Quick-Release Threaded Pivot-Only Hoist Rings

JW WINCO M8 Stainless Steel Quick-Release Pivot Hoist Ring

JW WINCO Quick-Release Hoist Ring berbahan Stainless Steel adalah komponen pengangkat (lifting) yang dirancang untuk aplikasi industri yang memerlukan ketahanan terhadap korosi. Produk tipe Pivot ini memiliki ukuran…

SKU 3G-OTH-330425

Juga terdaftar sebagai: 1133M812NI · 1133 M8 12 NI

Merek
JW WINCO
Item
M8 Stainless Steel Quick-Release Pivot Hoist Ring
Kategori
Corrosion-Resistant Quick-Release Threaded Pivot-Only Hoist Rings
Tersedia untuk Dipesan
Stok tersedia & bea cukai ditangani
  • 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
  • Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
  • Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Harga dagang sesuai penawaran — balasan dalam 24 jam
Jumlah
WhatsApp seorang insinyurMessage via Telegram
Tidak perlu akun — permintaan penawaran Anda langsung masuk ke tim insinyur kami. Akun gratis memungkinkan Anda melacak penawaran dan memesan ulang lebih cepat.
Pengiriman ke Seluruh Dunia
Pengiriman udara & laut
Lembar Data Atas Permintaan
Spesifikasi teknis
Penawaran 1 Hari
Balasan dalam 24 jam

Local availability & support — Indonesia

Phone
+65 8878 8355

Spesifikasi Teknis

JW WINCO
Manufacturer Part Number
1133-M8-12-NI
Type
M8 Thread Size, Pivot
Material
Stainless Steel
Operation
Lifting
Load Limit
2.1 kN
Thread Size
M8
Working Pin Length
12 mm
Working Load Limit - Side Load
0.8 kN (180 lbf)

Dokumen Teknis

Tidak ada dokumen teknis yang tersedia untuk produk ini.
Minta dokumentasi →
Tidak yakin ini adalah suku cadang yang tepat? Minta rekomendasi.

Butuh bantuan pemasangan atau rekayasa?

Instalasi, komisioning, rencana pemeliharaan, desain sistem, dan penawaran produk + layanan bundel — satu tim menangani cakupan penuh.
Bicaralah dengan seorang insinyur

Ajukan pertanyaan

JW WINCO Produk
3G Electric (S) Pte. Ltd. — Singapore

Deskripsi Produk

JW WINCO Quick-Release Hoist Ring berbahan Stainless Steel adalah komponen pengangkat (lifting) yang dirancang untuk aplikasi industri yang memerlukan ketahanan terhadap korosi. Produk tipe Pivot ini memiliki ukuran ulir M8 dengan batas beban kerja (Working Load Limit) sebesar 2.1 kN dan panjang pin kerja 12 mm. Dengan nomor part 1133-M8-12-NI, hoist ring ini ideal untuk lingkungan yang membutuhkan material tahan karat dan pengoperasian pivot-only.

Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.

Pertanyaan yang Sering Diajukan

Apa spesifikasi JW WINCO Quick-Release Hoist Ring 1133-M8-12-NI?

JW WINCO Quick-Release Hoist Ring 1133-M8-12-NI memiliki ukuran ulir M8, material Stainless Steel, tipe Pivot, dengan batas beban kerja (Working Load Limit) 2.1 kN dan beban samping (Side Load) 0.8 kN (180 lbf). Panjang pin kerja adalah 12 mm.

Untuk apa JW WINCO Quick-Release Hoist Ring digunakan?

Produk ini digunakan sebagai titik angkat (lifting point) yang dapat dilepas dengan cepat pada peralatan industri, terutama di lingkungan yang memerlukan ketahanan korosi. Tipe Pivot memungkinkan pergerakan rotasi saja, cocok untuk aplikasi pengangkatan dengan beban vertikal.

Bagaimana cara memilih JW WINCO Quick-Release Hoist Ring yang tepat?

Pilih berdasarkan ukuran ulir (M8), batas beban kerja (2.1 kN), dan material (Stainless Steel untuk ketahanan korosi). Pastikan panjang pin kerja (12 mm) sesuai dengan ketebalan dudukan. Untuk aplikasi dengan beban samping, perhatikan batas beban samping 0.8 kN (180 lbf).

Di mana beli JW WINCO Quick-Release Hoist Ring di Indonesia?

Anda dapat membeli JW WINCO Quick-Release Hoist Ring 1133-M8-12-NI melalui 3G Electric, distributor resmi yang memasok dan mengirimkan produk ini ke seluruh Indonesia. Kami menangani logistik dan bea cukai untuk memastikan produk sampai ke lokasi Anda.

Digunakan dalam

Aplikasi umum untuk JW WINCO
Machinery assembly — JW WINCO self-locking bearing locknuts (e.g., 1804.1-M50X1.5) for securing bearings on shafts in gearboxes and conveyors.
Fixture building — JW WINCO horizontal U-latch toggle clamps (e.g., 851.3-700-T6) for quick clamping in welding jigs and assembly fixtures.
Material handling — JW WINCO quick-release hoist rings (e.g., 1135-M12-17-ST) for lifting heavy components in manufacturing cells.
Shaft positioning — JW WINCO one-piece shaft collars (e.g., 5WG46/A) for retaining bearings or acting as stops on linear motion systems.
Linkage systems — JW WINCO stainless steel clevis rod ends (e.g., 8NXBIS) for connecting pneumatic cylinders or actuators in automated equipment.
Clamping arm extension — JW WINCO rigid clamping arm extenders (e.g., 801.1-85-16-ST) for increasing reach on toggle clamps in custom fixtures.

JW WINCO Produk

3G Electric memasok JW WINCO corrosion-resistant quick-release threaded pivot-only hoist rings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.

Anda mungkin juga membutuhkan

Pembakar & Pembakaran →Pompa & Kompresor →Suku Cadang →Semua Produk →

Compatible alternatives & equivalents

Cross-referenced by specification & description
This steel quick-release pivot-only hoist ring is designed for lifting operations requiring a secure, pivot-only attachment point. It features an M8 thread size and a 12 mm working pin length, with a working load limit of 2.1 kN and a side load capacity of 0.8 kN (180 lbf). Suitable for industrial rigging, machining, and material handling applications
JW WINCO
This steel quick-release pivot-only hoist ring is designed for lifting operations requiring a secure, pivot-only attachment point. It features an M8 thread size and a 12 mm working pin length, with a working load limit of 2.1 kN and a side load capacity of 0.8 kN (180 lbf). Suitable for industrial rigging, machining, and material handling applications
This corrosion-resistant quick-release hoist ring is made of stainless steel with an M10 thread and 14 mm working pin length. It supports a working load limit of 3.9 kN and a side load limit of 1.5 kN (337 lbf). The pivot/swivel design allows for safe lifting and positioning in environments requiring corrosion resistance
JW WINCO
This corrosion-resistant quick-release hoist ring is made of stainless steel with an M10 thread and 14 mm working pin length. It supports a working load limit of 3.9 kN and a side load limit of 1.5 kN (337 lbf). The pivot/swivel design allows for safe lifting and positioning in environments requiring corrosion resistance
Stainless steel quick-release hoist ring with M16 thread, 17 mm working pin length, and 8.4 kN load limit. Pivot/swivel design allows multi-directional lifting. Side load capacity 4.2 kN (944 lbf). Suitable for lifting operations in corrosive environments
JW WINCO
Stainless steel quick-release hoist ring with M16 thread, 17 mm working pin length, and 8.4 kN load limit. Pivot/swivel design allows multi-directional lifting. Side load capacity 4.2 kN (944 lbf). Suitable for lifting operations in corrosive environments
This corrosion-resistant quick-release threaded pivot and rotate hoist ring is made of stainless steel. It has an M20 thread size, a working pin length of 22 mm, a load limit of 16.6 kN, and a side load working limit of 5 kN (1124 lbf). Suitable for lifting and positioning loads in industrial applications where multi-directional handling is required
JW WINCO
This corrosion-resistant quick-release threaded pivot and rotate hoist ring is made of stainless steel. It has an M20 thread size, a working pin length of 22 mm, a load limit of 16.6 kN, and a side load working limit of 5 kN (1124 lbf). Suitable for lifting and positioning loads in industrial applications where multi-directional handling is required
Steel quick-release hoist ring with M8 thread and 12 mm working pin length. Rated for 2.1 kN lifting load and 0.8 kN side load. Pivot-and-rotate design aligns with load direction to reduce side stress. Used for lifting and securing loads in industrial material handling, assembly, and maintenance applications
JW WINCO
Steel quick-release hoist ring with M8 thread and 12 mm working pin length. Rated for 2.1 kN lifting load and 0.8 kN side load. Pivot-and-rotate design aligns with load direction to reduce side stress. Used for lifting and securing loads in industrial material handling, assembly, and maintenance applications
This stainless steel hoist ring is designed for lifting operations requiring corrosion resistance. It features a 3/4"-10 thread size, a working pin length of 22 mm, and a working load limit of 3,619 lbf (side load 5 kN / 1,124 lbf). Suitable for industrial environments where exposure to moisture or chemicals is a concern
JW WINCO
This stainless steel hoist ring is designed for lifting operations requiring corrosion resistance. It features a 3/4"-10 thread size, a working pin length of 22 mm, and a working load limit of 3,619 lbf (side load 5 kN / 1,124 lbf). Suitable for industrial environments where exposure to moisture or chemicals is a concern

Lainnya dari JW WINCO

Lihat semua JW WINCO suku cadang →
Corrosion-resistant pivot-only hoist ring with M16 threaded stud and 17 mm working pin length. Stainless steel construction. Rated for 8.4 kN lifting load and 4.2 kN (944 lbf) side load. Suitable for lifting applications requiring a quick-release attachment point in corrosive environments
JW WINCO
Corrosion-resistant pivot-only hoist ring with M16 threaded stud and 17 mm working pin length. Stainless steel construction. Rated for 8.4 kN lifting load and 4.2 kN (944 lbf) side load. Suitable for lifting applications requiring a quick-release attachment point in corrosive environments
This corrosion-resistant quick-release hoist ring is made of stainless steel and features a pivot-only design for lifting applications. It has an M10 thread size, a 3.9 kN load limit, and a 14 mm working pin length. The side load working load limit is 1.5 kN (337 lbf). Suitable for environments where corrosion resistance is required
JW WINCO
This corrosion-resistant quick-release hoist ring is made of stainless steel and features a pivot-only design for lifting applications. It has an M10 thread size, a 3.9 kN load limit, and a 14 mm working pin length. The side load working load limit is 1.5 kN (337 lbf). Suitable for environments where corrosion resistance is required
Stainless steel pivot-only hoist ring with 3/4"-10 thread size and 22 mm working pin length. Rated for 3,619 lbf load limit and 5.7 kN (1281 lbf) side load. Suitable for lifting operations in environments requiring corrosion resistance
JW WINCO
Stainless steel pivot-only hoist ring with 3/4"-10 thread size and 22 mm working pin length. Rated for 3,619 lbf load limit and 5.7 kN (1281 lbf) side load. Suitable for lifting operations in environments requiring corrosion resistance
This stainless steel pivot-only hoist ring features a quick-release mechanism for rapid attachment and detachment. With a 1"-8 thread size and a working load limit of 6,767 lbf (9.9 kN side load), it is suited for lifting applications requiring corrosion resistance
JW WINCO
This stainless steel pivot-only hoist ring features a quick-release mechanism for rapid attachment and detachment. With a 1"-8 thread size and a working load limit of 6,767 lbf (9.9 kN side load), it is suited for lifting applications requiring corrosion resistance
Stainless steel pivot-only hoist ring with quick-release threaded design. 1/2"-13 thread size, 17 mm working pin length, 1,529 lbf load limit, and 2.7 kN (607 lbf) side load limit. Suitable for lifting applications requiring corrosion resistance
JW WINCO
Stainless steel pivot-only hoist ring with quick-release threaded design. 1/2"-13 thread size, 17 mm working pin length, 1,529 lbf load limit, and 2.7 kN (607 lbf) side load limit. Suitable for lifting applications requiring corrosion resistance
This corrosion-resistant quick-release threaded pivot-only hoist ring is made of stainless steel. It has an M20 thread size, a working pin length of 22 mm, and a working load limit of 10 kN (side load 5 kN / 1124 lbf). Suitable for lifting operations requiring corrosion resistance
JW WINCO
This corrosion-resistant quick-release threaded pivot-only hoist ring is made of stainless steel. It has an M20 thread size, a working pin length of 22 mm, and a working load limit of 10 kN (side load 5 kN / 1124 lbf). Suitable for lifting operations requiring corrosion resistance
Stainless steel pivot-only hoist ring with M12 thread and quick-release mechanism. Rated for lifting with a working load limit of 6.2 kN and side load capacity of 2.3 kN (517 lbf). Working pin length is 17 mm. Suitable for lifting applications requiring corrosion resistance
JW WINCO
Stainless steel pivot-only hoist ring with M12 thread and quick-release mechanism. Rated for lifting with a working load limit of 6.2 kN and side load capacity of 2.3 kN (517 lbf). Working pin length is 17 mm. Suitable for lifting applications requiring corrosion resistance