Kami mengirim ke Indonesia — pintu ke pintu, bea cukai dan logistik ditangani oleh 3G Electric

3G Electric
Keranjang Permintaan PenawaranMinta PenawaranMasukDaftar
JW WINCO M16 Stainless Steel Quick-Release Pivot-Only Hoist Ring - Corrosion-Resistant Quick-Release Threaded Pivot-Only Hoist Rings
JW WINCOCorrosion-Resistant Quick-Release Threaded Pivot-Only Hoist Rings

JW WINCO M16 Stainless Steel Quick-Release Pivot-Only Hoist Ring

JW WINCO Quick-Release Hoist Ring berbahan Stainless Steel adalah komponen pengangkat (lifting) tipe pivot-only dengan ulir M16 yang dirancang untuk aplikasi industri yang memerlukan ketahanan korosi tinggi. Produk…

SKU 3G-OTH-330432

Juga terdaftar sebagai: 1133M1617NI · 1133 M16 17 NI

Merek
JW WINCO
Item
M16 Stainless Steel Quick-Release Pivot-Only Hoist Ring
Kategori
Corrosion-Resistant Quick-Release Threaded Pivot-Only Hoist Rings
Tersedia untuk Dipesan
Stok tersedia & bea cukai ditangani
  • 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
  • Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
  • Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Harga dagang sesuai penawaran — balasan dalam 24 jam
Jumlah
WhatsApp seorang insinyurMessage via Telegram
Tidak perlu akun — permintaan penawaran Anda langsung masuk ke tim insinyur kami. Akun gratis memungkinkan Anda melacak penawaran dan memesan ulang lebih cepat.
Pengiriman ke Seluruh Dunia
Pengiriman udara & laut
Lembar Data Atas Permintaan
Spesifikasi teknis
Penawaran 1 Hari
Balasan dalam 24 jam

Local availability & support — Indonesia

Phone
+65 8878 8355

Spesifikasi Teknis

JW WINCO
Manufacturer Part Number
1133-M16-17-NI
Type
M16 Thread Size, Pivot
Material
Stainless Steel
Operation
Lifting
Load Limit
8.4 kN
Thread Size
M16
Working Pin Length
17 mm
Working Load Limit - Side Load
4.2 kN (944 lbf)

Dokumen Teknis

Tidak ada dokumen teknis yang tersedia untuk produk ini.
Minta dokumentasi →
Tidak yakin ini adalah suku cadang yang tepat? Minta rekomendasi.

Butuh bantuan pemasangan atau rekayasa?

Instalasi, komisioning, rencana pemeliharaan, desain sistem, dan penawaran produk + layanan bundel — satu tim menangani cakupan penuh.
Bicaralah dengan seorang insinyur

Ajukan pertanyaan

JW WINCO Produk
3G Electric (S) Pte. Ltd. — Singapore

Deskripsi Produk

JW WINCO Quick-Release Hoist Ring berbahan Stainless Steel adalah komponen pengangkat (lifting) tipe pivot-only dengan ulir M16 yang dirancang untuk aplikasi industri yang memerlukan ketahanan korosi tinggi. Produk ini memiliki batas beban kerja (Working Load Limit) sebesar 8.4 kN dan batas beban samping (Side Load) sebesar 4.2 kN (944 lbf), dengan panjang pin kerja 17 mm. Nomor komponen: 1133-M16-17-NI. Cocok digunakan sebagai perlengkapan angkat pada peralatan industri di lingkungan lembap atau kimia.

Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.

Pertanyaan yang Sering Diajukan

Apa spesifikasi JW WINCO Quick-Release Hoist Ring 1133-M16-17-NI?

JW WINCO Quick-Release Hoist Ring ini memiliki ulir M16, material Stainless Steel, tipe pivot-only. Batas beban kerja (Working Load Limit) adalah 8.4 kN, dengan batas beban samping (Side Load) 4.2 kN (944 lbf). Panjang pin kerja 17 mm. Produk ini dirancang untuk operasi pengangkatan (lifting).

Untuk apa JW WINCO Quick-Release Hoist Ring digunakan?

Produk ini digunakan sebagai titik angkat (lifting point) pada peralatan industri, terutama di lingkungan yang memerlukan ketahanan korosi, seperti industri pengolahan makanan, kimia, atau kelautan. Tipe pivot-only memungkinkan pergerakan beban secara vertikal tanpa rotasi.

Bagaimana cara memilih JW WINCO Quick-Release Hoist Ring yang tepat?

Pilih berdasarkan ukuran ulir (M16), batas beban kerja (8.4 kN), dan panjang pin kerja (17 mm). Pastikan material Stainless Steel sesuai dengan lingkungan aplikasi Anda. Untuk beban samping, perhatikan batas 4.2 kN (944 lbf). Selalu sesuaikan dengan kapasitas angkat yang dibutuhkan.

Di mana beli JW WINCO Quick-Release Hoist Ring di Indonesia?

Anda dapat membeli JW WINCO Quick-Release Hoist Ring 1133-M16-17-NI melalui 3G Electric, distributor resmi yang memasok dan mengirimkan produk ini ke seluruh Indonesia. Kami menangani logistik dan bea cukai untuk memastikan produk sampai ke lokasi Anda.

Digunakan dalam

Aplikasi umum untuk JW WINCO
Machinery assembly — JW WINCO self-locking bearing locknuts (e.g., 1804.1-M50X1.5) for securing bearings on shafts in gearboxes and conveyors.
Fixture building — JW WINCO horizontal U-latch toggle clamps (e.g., 851.3-700-T6) for quick clamping in welding jigs and assembly fixtures.
Material handling — JW WINCO quick-release hoist rings (e.g., 1135-M12-17-ST) for lifting heavy components in manufacturing cells.
Shaft positioning — JW WINCO one-piece shaft collars (e.g., 5WG46/A) for retaining bearings or acting as stops on linear motion systems.
Linkage systems — JW WINCO stainless steel clevis rod ends (e.g., 8NXBIS) for connecting pneumatic cylinders or actuators in automated equipment.
Clamping arm extension — JW WINCO rigid clamping arm extenders (e.g., 801.1-85-16-ST) for increasing reach on toggle clamps in custom fixtures.

JW WINCO Produk

3G Electric memasok JW WINCO corrosion-resistant quick-release threaded pivot-only hoist rings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.

Anda mungkin juga membutuhkan

Pembakar & Pembakaran →Pompa & Kompresor →Suku Cadang →Semua Produk →

Compatible alternatives & equivalents

Cross-referenced by specification & description
This stainless steel hoist ring features a quick-release pivot and swivel design for lifting and positioning loads. With an M12 thread size and 17 mm working pin length, it has a working load limit of 6.2 kN and a side load limit of 2.3 kN (517 lbf). Suitable for industrial lifting applications requiring corrosion resistance
JW WINCO
This stainless steel hoist ring features a quick-release pivot and swivel design for lifting and positioning loads. With an M12 thread size and 17 mm working pin length, it has a working load limit of 6.2 kN and a side load limit of 2.3 kN (517 lbf). Suitable for industrial lifting applications requiring corrosion resistance
This corrosion-resistant quick-release hoist ring is made of stainless steel and features a pivot/swivel design for multi-angle lifting. It has an M8 thread size, 12 mm working pin length, and a working load limit of 2.1 kN with a side load capacity of 0.8 kN (180 lbf). Suitable for lifting operations in environments where corrosion resistance is required
JW WINCO
This corrosion-resistant quick-release hoist ring is made of stainless steel and features a pivot/swivel design for multi-angle lifting. It has an M8 thread size, 12 mm working pin length, and a working load limit of 2.1 kN with a side load capacity of 0.8 kN (180 lbf). Suitable for lifting operations in environments where corrosion resistance is required
JW WINCO Quick-Release Hoist Ring: Stainless Steel, 4,047 lbf Load Limit, 1"-8 Thread Size (MPN 1135-1X8-1.063-NI)
JW WINCO
JW WINCO Quick-Release Hoist Ring: Stainless Steel, 4,047 lbf Load Limit, 1"-8 Thread Size (MPN 1135-1X8-1.063-NI)
This clevis fork joint is made from corrosion-resistant stainless steel. It features a plain design with an M16 tap size and right-hand thread, and a body width of 32 mm. Used in mechanical linkages to connect threaded rods or shafts, allowing pivoting motion in industrial machinery and automation systems
JW WINCO
This clevis fork joint is made from corrosion-resistant stainless steel. It features a plain design with an M16 tap size and right-hand thread, and a body width of 32 mm. Used in mechanical linkages to connect threaded rods or shafts, allowing pivoting motion in industrial machinery and automation systems
This clevis fork joint is made from corrosion-resistant stainless steel, featuring a plain design with an M6 tap size and right-hand thread. The body width is 12 mm. It is used to connect a rod to a clevis pin, allowing angular misalignment in mechanical linkages
JW WINCO
This clevis fork joint is made from corrosion-resistant stainless steel, featuring a plain design with an M6 tap size and right-hand thread. The body width is 12 mm. It is used to connect a rod to a clevis pin, allowing angular misalignment in mechanical linkages
This clevis fork head is made from corrosion-resistant stainless steel. It features a plain design with a right-hand M12 tap size and a 24 mm body width. Used in industrial linkages to connect a rod to a clevis pin, allowing pivoting motion in applications where corrosion resistance is required
JW WINCO
This clevis fork head is made from corrosion-resistant stainless steel. It features a plain design with a right-hand M12 tap size and a 24 mm body width. Used in industrial linkages to connect a rod to a clevis pin, allowing pivoting motion in applications where corrosion resistance is required

Lainnya dari JW WINCO

Lihat semua JW WINCO suku cadang →
This corrosion-resistant quick-release hoist ring is made of stainless steel and features a pivot-only design for lifting applications. It has an M10 thread size, a 3.9 kN load limit, and a 14 mm working pin length. The side load working load limit is 1.5 kN (337 lbf). Suitable for environments where corrosion resistance is required
JW WINCO
This corrosion-resistant quick-release hoist ring is made of stainless steel and features a pivot-only design for lifting applications. It has an M10 thread size, a 3.9 kN load limit, and a 14 mm working pin length. The side load working load limit is 1.5 kN (337 lbf). Suitable for environments where corrosion resistance is required
This corrosion-resistant quick-release threaded pivot-only hoist ring is made of stainless steel. It has an M8 thread size, a working pin length of 12 mm, and a working load limit of 2.1 kN. The side load limit is 0.8 kN (180 lbf). Suitable for lifting applications where a pivot-only lifting point is required
JW WINCO
This corrosion-resistant quick-release threaded pivot-only hoist ring is made of stainless steel. It has an M8 thread size, a working pin length of 12 mm, and a working load limit of 2.1 kN. The side load limit is 0.8 kN (180 lbf). Suitable for lifting applications where a pivot-only lifting point is required
Stainless steel pivot-only hoist ring with 3/4"-10 thread size and 22 mm working pin length. Rated for 3,619 lbf load limit and 5.7 kN (1281 lbf) side load. Suitable for lifting operations in environments requiring corrosion resistance
JW WINCO
Stainless steel pivot-only hoist ring with 3/4"-10 thread size and 22 mm working pin length. Rated for 3,619 lbf load limit and 5.7 kN (1281 lbf) side load. Suitable for lifting operations in environments requiring corrosion resistance
This stainless steel pivot-only hoist ring features a quick-release mechanism for rapid attachment and detachment. With a 1"-8 thread size and a working load limit of 6,767 lbf (9.9 kN side load), it is suited for lifting applications requiring corrosion resistance
JW WINCO
This stainless steel pivot-only hoist ring features a quick-release mechanism for rapid attachment and detachment. With a 1"-8 thread size and a working load limit of 6,767 lbf (9.9 kN side load), it is suited for lifting applications requiring corrosion resistance
Stainless steel pivot-only hoist ring with quick-release threaded design. 1/2"-13 thread size, 17 mm working pin length, 1,529 lbf load limit, and 2.7 kN (607 lbf) side load limit. Suitable for lifting applications requiring corrosion resistance
JW WINCO
Stainless steel pivot-only hoist ring with quick-release threaded design. 1/2"-13 thread size, 17 mm working pin length, 1,529 lbf load limit, and 2.7 kN (607 lbf) side load limit. Suitable for lifting applications requiring corrosion resistance
This corrosion-resistant quick-release threaded pivot-only hoist ring is made of stainless steel. It has an M20 thread size, a working pin length of 22 mm, and a working load limit of 10 kN (side load 5 kN / 1124 lbf). Suitable for lifting operations requiring corrosion resistance
JW WINCO
This corrosion-resistant quick-release threaded pivot-only hoist ring is made of stainless steel. It has an M20 thread size, a working pin length of 22 mm, and a working load limit of 10 kN (side load 5 kN / 1124 lbf). Suitable for lifting operations requiring corrosion resistance
Stainless steel pivot-only hoist ring with M12 thread and quick-release mechanism. Rated for lifting with a working load limit of 6.2 kN and side load capacity of 2.3 kN (517 lbf). Working pin length is 17 mm. Suitable for lifting applications requiring corrosion resistance
JW WINCO
Stainless steel pivot-only hoist ring with M12 thread and quick-release mechanism. Rated for lifting with a working load limit of 6.2 kN and side load capacity of 2.3 kN (517 lbf). Working pin length is 17 mm. Suitable for lifting applications requiring corrosion resistance