JW WINCO Plastic Hand Knob w/ Stainless Steel Stud w/ Swivel Thrust Pad: 7 Point
The JW WINCO Plastic Hand Knob with Stainless Steel Stud and Swivel Thrust Pad is a 7-Arm Knob with Swivel Thrust Pad & Threaded Stud, featuring a 7-point thrust pad and an M8 thread. It has a pad base diameter of 21…
SKU 3G-OTH-540051
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The JW WINCO Plastic Hand Knob with Stainless Steel Stud and Swivel Thrust Pad is a 7-Arm Knob with Swivel Thrust Pad & Threaded Stud, featuring a 7-point thrust pad and an M8 thread. It has a pad base diameter of 21 mm and is identified by manufacturer part number 6336.12-40-M8-50-21.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the JW WINCO Plastic Hand Knob with Swivel Thrust Pad used for?
This 7-arm knob with swivel thrust pad is used for manual clamping, positioning, and adjustment in industrial machinery and fixtures. The M8 threaded stud and 21 mm pad base provide secure, repeatable force application without marring surfaces.
What are the specifications of the JW WINCO 6336.12-40-M8-50-21?
The JW WINCO 6336.12-40-M8-50-21 is a plastic hand knob with a stainless steel stud and a 7-point swivel thrust pad. It has an M8 thread and a pad base diameter of 21 mm. The 7-arm design offers ergonomic grip for manual tightening.
Where to buy JW WINCO hand knobs worldwide?
3G Electric supplies JW WINCO hand knobs worldwide, handling full logistics and customs clearance. As a global industrial sourcing partner, we provide genuine JW WINCO parts like the 6336.12-40-M8-50-21 with M8 thread and 21 mm pad base to any destination.
How to install a JW WINCO swivel thrust pad knob?
Install the JW WINCO knob by threading the M8 stud into a matching tapped hole or nut. Tighten by hand using the 7-arm grip until the swivel thrust pad contacts the workpiece. The pad rotates to prevent surface damage during clamping. Avoid over-torquing.
Digunakan dalam
Aplikasi umum untuk JW WINCOJW WINCO Produk
3G Electric memasok JW WINCO 7-arm knobs with swivel thrust pad & threaded stud. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
