Kami mengirim ke Indonesia — pintu ke pintu, bea cukai dan logistik ditangani oleh 3G Electric

3G Electric
Keranjang Permintaan PenawaranMinta PenawaranMasukDaftar
Katup Pernapasan JW WINCO: 3/8", SAE, Desain Tinggi dengan Tutup Pernapasan Baja Tahan Karat - Pressure-Relief Breather Vents
JW WINCOPressure-Relief Breather Vents

Katup Pernapasan JW WINCO: 3/8", SAE, Desain Tinggi dengan Tutup Pernapasan Baja Tahan Karat

JW WINCO Breather Valve dengan ukuran ulir 3/8" SAE adalah katup pelepas tekanan (pressure-relief breather vent) yang dirancang untuk aplikasi industri. Produk ini memiliki bodi kuningan (brass) dengan tutup breather…

SKU 3G-OTH-591709

Juga terdaftar sebagai: 883G3820BMS · 883 G3 8 20 B MS · 883-G3-8-20-B-MS

Merek
JW WINCO
Item
Katup Pernapasan JW WINCO: 3/8", SAE, Desain Tinggi dengan Tutup Pernapasan Baja Tahan Karat
Kategori
Pressure-Relief Breather Vents
Tersedia untuk Dipesan
Stok tersedia & bea cukai ditangani
  • 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
  • Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
  • Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Harga dagang sesuai penawaran — balasan dalam 24 jam
Jumlah
WhatsApp seorang insinyurMessage via Telegram
Tidak perlu akun — permintaan penawaran Anda langsung masuk ke tim insinyur kami. Akun gratis memungkinkan Anda melacak penawaran dan memesan ulang lebih cepat.
Pengiriman ke Seluruh Dunia
Pengiriman udara & laut
Lembar Data Atas Permintaan
Spesifikasi teknis
Penawaran 1 Hari
Balasan dalam 24 jam

Local availability & support — Indonesia

Phone
+65 8878 8355

Spesifikasi Teknis

JW WINCO
Manufacturer Part Number
883-G3/8-20-B-MS
Type
SAE, High Design with Stainless Steel Breather Cap Design, Brass
Thread Size
3/8"
Thread Type
SAE
Body Material
Brass
Opening Pressure - Minimum
20 mbar

Dokumen Teknis

Tidak ada dokumen teknis yang tersedia untuk produk ini.
Minta dokumentasi →
Tidak yakin ini adalah suku cadang yang tepat? Minta rekomendasi.

Butuh bantuan pemasangan atau rekayasa?

Instalasi, komisioning, rencana pemeliharaan, desain sistem, dan penawaran produk + layanan bundel — satu tim menangani cakupan penuh.
Bicaralah dengan seorang insinyur

Ajukan pertanyaan

JW WINCO Produk
3G Electric (S) Pte. Ltd. — Singapore

Deskripsi Produk

JW WINCO Breather Valve dengan ukuran ulir 3/8" SAE adalah katup pelepas tekanan (pressure-relief breather vent) yang dirancang untuk aplikasi industri. Produk ini memiliki bodi kuningan (brass) dengan tutup breather stainless steel, dan tekanan bukaan minimum 20 mbar. Katup ini ideal untuk sistem hidrolik, tangki, atau peralatan yang memerlukan ventilasi tekanan rendah yang andal.

Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.

Pertanyaan yang Sering Diajukan

Untuk apa JW WINCO Breather Valve 3/8" digunakan?

JW WINCO Breather Valve 3/8" SAE digunakan sebagai katup pelepas tekanan pada tangki hidrolik, gearbox, atau reservoir untuk mencegah tekanan berlebih atau vakum. Dengan tekanan bukaan minimum 20 mbar, katup ini menjaga keseimbangan tekanan internal sistem.

Apa spesifikasi JW WINCO Breather Valve 883-G3/8-20-B-MS?

Spesifikasi JW WINCO Breather Valve model 883-G3/8-20-B-MS meliputi: tipe ulir SAE 3/8", bodi kuningan (brass), tutup breather stainless steel, dan tekanan bukaan minimum 20 mbar. Produk ini dirancang untuk aplikasi tekanan rendah yang memerlukan ventilasi andal.

Di mana beli JW WINCO Breather Valve di Indonesia?

Anda dapat membeli JW WINCO Breather Valve 3/8" SAE melalui 3G Electric, distributor resmi yang memasok dan mengirimkan produk ini ke seluruh Indonesia. Kami menangani logistik dan bea cukai untuk memastikan produk sampai ke lokasi Anda.

Bagaimana cara memilih JW WINCO Breather Valve yang tepat?

Pilih JW WINCO Breather Valve berdasarkan ukuran ulir (3/8" SAE), tekanan bukaan (20 mbar), dan material bodi (kuningan). Pastikan katup sesuai dengan tekanan operasi sistem Anda. Untuk aplikasi dengan tekanan rendah, model 883-G3/8-20-B-MS adalah pilihan yang tepat.

Digunakan dalam

Aplikasi umum untuk JW WINCO
Machinery assembly — JW WINCO self-locking bearing locknuts (e.g., 1804.1-M50X1.5) for securing bearings on shafts in gearboxes and conveyors.
Fixture building — JW WINCO horizontal U-latch toggle clamps (e.g., 851.3-700-T6) for quick clamping in welding jigs and assembly fixtures.
Material handling — JW WINCO quick-release hoist rings (e.g., 1135-M12-17-ST) for lifting heavy components in manufacturing cells.
Shaft positioning — JW WINCO one-piece shaft collars (e.g., 5WG46/A) for retaining bearings or acting as stops on linear motion systems.
Linkage systems — JW WINCO stainless steel clevis rod ends (e.g., 8NXBIS) for connecting pneumatic cylinders or actuators in automated equipment.
Clamping arm extension — JW WINCO rigid clamping arm extenders (e.g., 801.1-85-16-ST) for increasing reach on toggle clamps in custom fixtures.

JW WINCO Produk

3G Electric memasok JW WINCO pressure-relief breather vents. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.

Anda mungkin juga membutuhkan

Pembakar & Pembakaran →Pompa & Kompresor →Suku Cadang →Semua Produk →

Lainnya dari JW WINCO

Lihat semua JW WINCO suku cadang →
SAE high-design pressure-relief breather vent with stainless steel cap and brass body. Minimum opening pressure of 20 mbar. Used to relieve pressure buildup in sealed enclosures, gearboxes, and fluid systems, protecting seals and components
JW WINCO
SAE high-design pressure-relief breather vent with stainless steel cap and brass body. Minimum opening pressure of 20 mbar. Used to relieve pressure buildup in sealed enclosures, gearboxes, and fluid systems, protecting seals and components
This pressure-relief breather vent features a low-profile design without a breather cap, with a brass body and 3/8" SAE thread. It opens at a minimum pressure of 160 mbar to relieve excess pressure in hydraulic or pneumatic systems, protecting seals and components. Commonly used on industrial machinery, gearboxes, and fluid reservoirs requiring controlled venting
JW WINCO
This pressure-relief breather vent features a low-profile design without a breather cap, with a brass body and 3/8" SAE thread. It opens at a minimum pressure of 160 mbar to relieve excess pressure in hydraulic or pneumatic systems, protecting seals and components. Commonly used on industrial machinery, gearboxes, and fluid reservoirs requiring controlled venting
Metric low-design pressure-relief breather vent without cap. Brass body with M12 metric thread. Minimum opening pressure of 160 mbar. Used to equalize pressure in sealed enclosures such as hydraulic tanks, gearboxes, and industrial fluid systems
JW WINCO
Metric low-design pressure-relief breather vent without cap. Brass body with M12 metric thread. Minimum opening pressure of 160 mbar. Used to equalize pressure in sealed enclosures such as hydraulic tanks, gearboxes, and industrial fluid systems
SAE pressure-relief breather vent with green ring design. Features a 1/2" SAE thread and brass body. Used to vent excess pressure from hydraulic or pneumatic systems while preventing contamination in industrial equipment
JW WINCO
SAE pressure-relief breather vent with green ring design. Features a 1/2" SAE thread and brass body. Used to vent excess pressure from hydraulic or pneumatic systems while preventing contamination in industrial equipment
Metric pressure-relief breather vent with low design without breather cap. Features M16 metric thread, brass body, and minimum opening pressure of 20 mbar. Used for pressure equalization in sealed enclosures such as hydraulic tanks and gearboxes
JW WINCO
Metric pressure-relief breather vent with low design without breather cap. Features M16 metric thread, brass body, and minimum opening pressure of 20 mbar. Used for pressure equalization in sealed enclosures such as hydraulic tanks and gearboxes
This pressure-relief breather vent from JW WINCO features a 3/8" SAE thread, brass body, and low design without a breather cap. It has a minimum opening pressure of 20 mbar, making it suitable for relieving excess pressure in hydraulic or pneumatic systems, industrial machinery, and fluid power applications
JW WINCO
This pressure-relief breather vent from JW WINCO features a 3/8" SAE thread, brass body, and low design without a breather cap. It has a minimum opening pressure of 20 mbar, making it suitable for relieving excess pressure in hydraulic or pneumatic systems, industrial machinery, and fluid power applications
This pressure-relief breather vent from JW WINCO features a 1/4" SAE thread and a brass body. It has a low design without a breather cap and a minimum opening pressure of 20 mbar. Used in hydraulic and pneumatic systems to relieve excess pressure and protect equipment from overpressure
JW WINCO
This pressure-relief breather vent from JW WINCO features a 1/4" SAE thread and a brass body. It has a low design without a breather cap and a minimum opening pressure of 20 mbar. Used in hydraulic and pneumatic systems to relieve excess pressure and protect equipment from overpressure
Metric pressure-relief breather vent with green ring design, constructed from brass. Features M22 thread size and 33 mm overall height. Used to vent excess pressure from gearboxes, hydraulic tanks, or reservoirs to prevent seal damage and contamination
JW WINCO
Metric pressure-relief breather vent with green ring design, constructed from brass. Features M22 thread size and 33 mm overall height. Used to vent excess pressure from gearboxes, hydraulic tanks, or reservoirs to prevent seal damage and contamination