Kami mengirim ke Indonesia — pintu ke pintu, bea cukai dan logistik ditangani oleh 3G Electric

3G Electric
Keranjang Permintaan PenawaranMinta PenawaranMasukDaftar
KIPP Rear-Mount Acetal Insert with Flat Face, 12 mm Dia, M5 Thread, 12 mm Height - Rear-Mount Acetal Inserts with Flat Face
KIPPRear-Mount Acetal Inserts with Flat Face

KIPP Rear-Mount Acetal Insert with Flat Face, 12 mm Dia, M5 Thread, 12 mm Height

KIPP Rear-Mount Insert w/Flat Face adalah insert pemasangan belakang berbahan bodi asetal dengan permukaan datar, dirancang untuk aplikasi industri yang membutuhkan ketahanan aus dan gesekan rendah. Produk ini…

SKU 3G-OTH-183667

Juga terdaftar sebagai: K038512129 · K0385 12129 · K0385-12129

Merek
KIPP
Item
Rear-Mount Acetal Insert with Flat Face, 12 mm Dia, M5 Thread, 12 mm Height
Kategori
Rear-Mount Acetal Inserts with Flat Face
Tersedia untuk Dipesan
Stok tersedia & bea cukai ditangani
  • 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
  • Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
  • Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Harga dagang sesuai penawaran — balasan dalam 24 jam
Jumlah
WhatsApp seorang insinyurMessage via Telegram
Tidak perlu akun — permintaan penawaran Anda langsung masuk ke tim insinyur kami. Akun gratis memungkinkan Anda melacak penawaran dan memesan ulang lebih cepat.
Pengiriman ke Seluruh Dunia
Pengiriman udara & laut
Lembar Data Atas Permintaan
Spesifikasi teknis
Penawaran 1 Hari
Balasan dalam 24 jam

Local availability & support — Indonesia

Phone
+65 8878 8355

Spesifikasi Teknis

KIPP
Manufacturer Part Number
K0385.12129

Dokumen Teknis

Tidak ada dokumen teknis yang tersedia untuk produk ini.
Minta dokumentasi →
Tidak yakin ini adalah suku cadang yang tepat? Minta rekomendasi.

Butuh bantuan pemasangan atau rekayasa?

Instalasi, komisioning, rencana pemeliharaan, desain sistem, dan penawaran produk + layanan bundel — satu tim menangani cakupan penuh.
Bicaralah dengan seorang insinyur

Ajukan pertanyaan

KIPP Produk
3G Electric (S) Pte. Ltd. — Singapore

Deskripsi Produk

KIPP Rear-Mount Insert w/Flat Face adalah insert pemasangan belakang berbahan bodi asetal dengan permukaan datar, dirancang untuk aplikasi industri yang membutuhkan ketahanan aus dan gesekan rendah. Produk ini memiliki diameter 12 mm, ulir M5, tinggi 12 mm, dan permukaan halus (smooth). Cocok digunakan sebagai komponen pada peralatan industri, meja kerja, atau fixture yang memerlukan penyangga atau penahan yang presisi.

Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.

Pertanyaan yang Sering Diajukan

Apa spesifikasi KIPP Rear-Mount Insert w/Flat Face?

KIPP Rear-Mount Insert w/Flat Face memiliki diameter 12 mm, ulir M5, tinggi 12 mm, permukaan halus (smooth), dan bodi asetal. Produk ini dirancang untuk pemasangan belakang dengan permukaan datar, ideal untuk aplikasi yang memerlukan ketahanan aus dan gesekan rendah.

Untuk apa KIPP Rear-Mount Insert w/Flat Face digunakan?

Insert ini digunakan sebagai komponen pada peralatan industri, meja kerja, atau fixture yang memerlukan penyangga atau penahan presisi. Bodi asetal memberikan ketahanan aus dan gesekan rendah, cocok untuk aplikasi yang membutuhkan permukaan datar dan pemasangan belakang.

Di mana beli KIPP Rear-Mount Insert w/Flat Face di Indonesia?

Anda dapat membeli KIPP Rear-Mount Insert w/Flat Face melalui 3G Electric, distributor resmi yang memasok dan mengirimkan produk ini ke Indonesia. Kami menangani logistik dan bea cukai untuk memastikan produk sampai ke lokasi Anda.

Bagaimana cara memilih KIPP Rear-Mount Insert yang tepat?

Pilih insert berdasarkan diameter, ulir, tinggi, dan bahan bodi. KIPP Rear-Mount Insert w/Flat Face dengan diameter 12 mm, ulir M5, tinggi 12 mm, dan bodi asetal cocok untuk aplikasi yang memerlukan permukaan datar dan ketahanan aus. Pastikan ukuran sesuai dengan kebutuhan fixture atau peralatan Anda.

Digunakan dalam

Aplikasi umum untuk KIPP
Jig and fixture construction — KIPP indexing plungers (e.g., SKU 53EC55) for repeatable workpiece positioning
Assembly line tooling — KIPP threaded grippers with flat pads (e.g., SKU 801Y95) for clamping components
Machine tool alignment — KIPP tapered-head locating pins (e.g., SKU 801XY4) for precise part registration
Sanitary processing equipment — KIPP hygienic sockets (e.g., SKU 802KU2) for tooling in food-grade environments
Abrasive material handling — KIPP diamond-faced inserts (e.g., SKU 801XH6) for gripping in dusty or gritty conditions
Fixture leveling and support — KIPP positioning feet with flat faces (e.g., SKU 615V08) for stable machine setup

KIPP Produk

3G Electric memasok KIPP rear-mount acetal inserts with flat face. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.

Anda mungkin juga membutuhkan

Pembakar & Pembakaran →Pompa & Kompresor →Suku Cadang →Semua Produk →

Compatible alternatives & equivalents

Cross-referenced by specification & description
This rear-mount insert features a flat face and is made from acetal, providing a low-friction, wear-resistant bearing surface. It is designed for press-fit installation into fixture plates and is commonly used in jig and fixture building for locating or clamping workpieces. The smooth surface and corrosion-resistant acetal body suit applications in assembly lines, inspection fixtures, and automated handling equipment
KIPP
This rear-mount insert features a flat face and is made from acetal, providing a low-friction, wear-resistant bearing surface. It is designed for press-fit installation into fixture plates and is commonly used in jig and fixture building for locating or clamping workpieces. The smooth surface and corrosion-resistant acetal body suit applications in assembly lines, inspection fixtures, and automated handling equipment
This rear-mount steel insert with a flat face provides a threaded mounting point in panels or fixtures where access is limited to one side. With a 12 mm diameter, M5 thread, and 12 mm height, it is designed for secure, flush mounting in thin panels. Commonly used in jigs, fixtures, and machine guarding applications
KIPP
This rear-mount steel insert with a flat face provides a threaded mounting point in panels or fixtures where access is limited to one side. With a 12 mm diameter, M5 thread, and 12 mm height, it is designed for secure, flush mounting in thin panels. Commonly used in jigs, fixtures, and machine guarding applications
This rear-mount insert features a hardened steel construction with a smooth flat face. It is designed for use in jig and fixture construction, providing a replaceable locating or support point in tooling plates and workholding devices. The insert has a 12 mm diameter, M5 thread, and 10 mm height
KIPP
This rear-mount insert features a hardened steel construction with a smooth flat face. It is designed for use in jig and fixture construction, providing a replaceable locating or support point in tooling plates and workholding devices. The insert has a 12 mm diameter, M5 thread, and 10 mm height
This rear-mount steel insert features a flat face and is designed for permanent installation into counterbored holes in jigs, fixtures, and workholding assemblies. It provides a threaded M6 mounting point with a flush or recessed surface, eliminating protruding hardware. The insert has a smooth finish and measures 25 mm in diameter with a 12 mm height
KIPP
This rear-mount steel insert features a flat face and is designed for permanent installation into counterbored holes in jigs, fixtures, and workholding assemblies. It provides a threaded M6 mounting point with a flush or recessed surface, eliminating protruding hardware. The insert has a smooth finish and measures 25 mm in diameter with a 12 mm height

Lainnya dari KIPP

Lihat semua KIPP suku cadang →
Rear-mount insert with a smooth flat face, made from acetal (POM) with a black finish. Features a 20 mm diameter, M6 thread, and 10 mm height. Used in jigs, fixtures, and assembly tooling to provide a low-friction bearing surface for light-duty positioning and sliding applications
KIPP
Rear-mount insert with a smooth flat face, made from acetal (POM) with a black finish. Features a 20 mm diameter, M6 thread, and 10 mm height. Used in jigs, fixtures, and assembly tooling to provide a low-friction bearing surface for light-duty positioning and sliding applications
This rear-mount insert features a smooth flat face and is made from acetal, providing a low-friction bearing surface for locating or clamping workpieces in jigs, fixtures, and assembly tooling. It is designed for press-fit installation into a counterbored hole. The acetal body resists wear and corrosion, making it suitable for automated production lines and manual workstations
KIPP
This rear-mount insert features a smooth flat face and is made from acetal, providing a low-friction bearing surface for locating or clamping workpieces in jigs, fixtures, and assembly tooling. It is designed for press-fit installation into a counterbored hole. The acetal body resists wear and corrosion, making it suitable for automated production lines and manual workstations
This rear-mount insert features a smooth flat face and an acetal body, providing low friction and corrosion resistance. It is designed for use in jigs, fixtures, and assembly equipment as a bearing surface or guide. The M6 thread allows secure rear mounting in workholding applications
KIPP
This rear-mount insert features a smooth flat face and an acetal body, providing low friction and corrosion resistance. It is designed for use in jigs, fixtures, and assembly equipment as a bearing surface or guide. The M6 thread allows secure rear mounting in workholding applications
This rear-mount insert features a smooth flat face and is made from acetal, providing low friction and chemical resistance. With a 20 mm diameter, M6 thread, and 12 mm height, it is designed for mounting in fixture plates or machine tables. Commonly used in jigs, fixtures, and assembly tooling to create durable bearing surfaces or stops
KIPP
This rear-mount insert features a smooth flat face and is made from acetal, providing low friction and chemical resistance. With a 20 mm diameter, M6 thread, and 12 mm height, it is designed for mounting in fixture plates or machine tables. Commonly used in jigs, fixtures, and assembly tooling to create durable bearing surfaces or stops
This rear-mount insert features a flat face and is made from acetal, providing a low-friction bearing surface for locating or clamping workpieces in jigs and fixtures. It has a 12 mm diameter, M5 thread, and 10 mm height with a smooth surface. Suitable for use in assembly lines, inspection fixtures, and automated manufacturing environments
KIPP
This rear-mount insert features a flat face and is made from acetal, providing a low-friction bearing surface for locating or clamping workpieces in jigs and fixtures. It has a 12 mm diameter, M5 thread, and 10 mm height with a smooth surface. Suitable for use in assembly lines, inspection fixtures, and automated manufacturing environments
Rear-mount insert with a smooth flat face, made from acetal for low friction and chemical resistance. Features a 25 mm diameter, M6 thread, and 10 mm height. Used in jigs, fixtures, and workholding systems to provide a durable bearing surface for sliding or clamping components
KIPP
Rear-mount insert with a smooth flat face, made from acetal for low friction and chemical resistance. Features a 25 mm diameter, M6 thread, and 10 mm height. Used in jigs, fixtures, and workholding systems to provide a durable bearing surface for sliding or clamping components
This rear-mount insert features a flat face and is made from acetal, providing a low-friction bearing surface for locating or clamping workpieces in jig and fixture building. It has a 10 mm diameter, M5 thread, and 10 mm height. The smooth acetal body resists wear and corrosion, suitable for assembly lines, inspection fixtures, and automated workstations
KIPP
This rear-mount insert features a flat face and is made from acetal, providing a low-friction bearing surface for locating or clamping workpieces in jig and fixture building. It has a 10 mm diameter, M5 thread, and 10 mm height. The smooth acetal body resists wear and corrosion, suitable for assembly lines, inspection fixtures, and automated workstations
Rear-mount insert with a flat face, made from acetal for low friction and chemical resistance. Features a 25 mm diameter, M6 thread, and 12 mm height. Used in jigs, fixtures, and workholding systems as a bearing surface for locating or clamping parts
KIPP
Rear-mount insert with a flat face, made from acetal for low friction and chemical resistance. Features a 25 mm diameter, M6 thread, and 12 mm height. Used in jigs, fixtures, and workholding systems as a bearing surface for locating or clamping parts