Kami mengirim ke Indonesia — pintu ke pintu, bea cukai dan logistik ditangani oleh 3G Electric

3G Electric
Keranjang Permintaan PenawaranMinta PenawaranMasukDaftar
KIPP Rear-Mount Acetal Insert with Flat Face, 20 mm Dia, M6 Thread, 12 mm Height - Rear-Mount Acetal Inserts with Flat Face
KIPPRear-Mount Acetal Inserts with Flat Face

KIPP Rear-Mount Acetal Insert with Flat Face, 20 mm Dia, M6 Thread, 12 mm Height

KIPP Rear-Mount Insert w/Flat Face adalah insert pemasangan belakang berbahan bodi asetal dengan permukaan datar. Produk ini memiliki diameter 20 mm, ulir M6, tinggi 12 mm, dan permukaan halus. Insert ini dirancang…

SKU 3G-OTH-183673

Juga terdaftar sebagai: K038520129 · K0385 20129 · K0385-20129

Merek
KIPP
Item
Rear-Mount Acetal Insert with Flat Face, 20 mm Dia, M6 Thread, 12 mm Height
Kategori
Rear-Mount Acetal Inserts with Flat Face
Tersedia untuk Dipesan
Stok tersedia & bea cukai ditangani
  • 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
  • Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
  • Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Harga dagang sesuai penawaran — balasan dalam 24 jam
Jumlah
WhatsApp seorang insinyurMessage via Telegram
Tidak perlu akun — permintaan penawaran Anda langsung masuk ke tim insinyur kami. Akun gratis memungkinkan Anda melacak penawaran dan memesan ulang lebih cepat.
Pengiriman ke Seluruh Dunia
Pengiriman udara & laut
Lembar Data Atas Permintaan
Spesifikasi teknis
Penawaran 1 Hari
Balasan dalam 24 jam

Local availability & support — Indonesia

Phone
+65 8878 8355

Spesifikasi Teknis

KIPP
Manufacturer Part Number
K0385.20129

Dokumen Teknis

Tidak ada dokumen teknis yang tersedia untuk produk ini.
Minta dokumentasi →
Tidak yakin ini adalah suku cadang yang tepat? Minta rekomendasi.

Butuh bantuan pemasangan atau rekayasa?

Instalasi, komisioning, rencana pemeliharaan, desain sistem, dan penawaran produk + layanan bundel — satu tim menangani cakupan penuh.
Bicaralah dengan seorang insinyur

Ajukan pertanyaan

KIPP Produk
3G Electric (S) Pte. Ltd. — Singapore

Deskripsi Produk

KIPP Rear-Mount Insert w/Flat Face adalah insert pemasangan belakang berbahan bodi asetal dengan permukaan datar. Produk ini memiliki diameter 20 mm, ulir M6, tinggi 12 mm, dan permukaan halus. Insert ini dirancang untuk aplikasi pemasangan yang membutuhkan ketahanan dan presisi, cocok digunakan sebagai komponen peralatan industri di berbagai sektor manufaktur.

Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.

Pertanyaan yang Sering Diajukan

Apa spesifikasi KIPP Rear-Mount Insert w/Flat Face?

KIPP Rear-Mount Insert w/Flat Face memiliki diameter 20 mm, ulir M6, tinggi 12 mm, permukaan halus, dan bodi asetal. Produk ini dirancang untuk pemasangan belakang dengan permukaan datar.

Untuk apa KIPP Rear-Mount Insert w/Flat Face digunakan?

Insert ini digunakan sebagai komponen pemasangan pada peralatan industri, khususnya untuk aplikasi yang memerlukan permukaan datar dan pemasangan belakang. Bodi asetal memberikan ketahanan terhadap aus dan korosi.

Di mana beli KIPP Rear-Mount Insert w/Flat Face di Indonesia?

Anda dapat membeli KIPP Rear-Mount Insert w/Flat Face melalui 3G Electric, distributor resmi yang memasok dan mengirimkan produk ini ke seluruh Indonesia. Kami menangani logistik dan bea cukai untuk memastikan pengiriman tepat waktu.

Bagaimana cara memilih KIPP Rear-Mount Insert yang tepat?

Pilih insert berdasarkan diameter, ulir, tinggi, dan bahan yang sesuai dengan aplikasi Anda. KIPP Rear-Mount Insert w/Flat Face dengan diameter 20 mm, ulir M6, tinggi 12 mm, dan bodi asetal cocok untuk pemasangan belakang dengan permukaan datar.

Digunakan dalam

Aplikasi umum untuk KIPP
Jig and fixture construction — KIPP indexing plungers (e.g., SKU 53EC55) for repeatable workpiece positioning
Assembly line tooling — KIPP threaded grippers with flat pads (e.g., SKU 801Y95) for clamping components
Machine tool alignment — KIPP tapered-head locating pins (e.g., SKU 801XY4) for precise part registration
Sanitary processing equipment — KIPP hygienic sockets (e.g., SKU 802KU2) for tooling in food-grade environments
Abrasive material handling — KIPP diamond-faced inserts (e.g., SKU 801XH6) for gripping in dusty or gritty conditions
Fixture leveling and support — KIPP positioning feet with flat faces (e.g., SKU 615V08) for stable machine setup

KIPP Produk

3G Electric memasok KIPP rear-mount acetal inserts with flat face. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.

Anda mungkin juga membutuhkan

Pembakar & Pembakaran →Pompa & Kompresor →Suku Cadang →Semua Produk →

Compatible alternatives & equivalents

Cross-referenced by specification & description
This rear-mount insert features a flat face and is made from acetal, providing a low-friction, wear-resistant bearing surface. It is designed for press-fit installation into fixture plates and is commonly used in jig and fixture building for locating or clamping workpieces. The smooth surface and corrosion-resistant acetal body suit applications in assembly lines, inspection fixtures, and automated handling equipment
KIPP
This rear-mount insert features a flat face and is made from acetal, providing a low-friction, wear-resistant bearing surface. It is designed for press-fit installation into fixture plates and is commonly used in jig and fixture building for locating or clamping workpieces. The smooth surface and corrosion-resistant acetal body suit applications in assembly lines, inspection fixtures, and automated handling equipment
Steel insert with a smooth flat face for flush mounting in jigs, fixtures, and workholding systems. Provides a durable threaded mounting point for clamping or positioning components. Suitable for precision assembly and machining applications where space is limited
KIPP
Steel insert with a smooth flat face for flush mounting in jigs, fixtures, and workholding systems. Provides a durable threaded mounting point for clamping or positioning components. Suitable for precision assembly and machining applications where space is limited
Steel insert with a smooth flat face for rear mounting into pre-drilled holes. Provides a flush threaded mounting point for clamping or locating workpieces in jig and fixture construction. Dimensions: 20 mm diameter, M6 thread, 10 mm height
KIPP
Steel insert with a smooth flat face for rear mounting into pre-drilled holes. Provides a flush threaded mounting point for clamping or locating workpieces in jig and fixture construction. Dimensions: 20 mm diameter, M6 thread, 10 mm height
This rear-mount steel insert features a flat face and is designed for permanent installation into counterbored holes in jigs, fixtures, and workholding assemblies. It provides a threaded M6 mounting point with a flush or recessed surface, eliminating protruding hardware. The insert has a smooth finish and measures 25 mm in diameter with a 12 mm height
KIPP
This rear-mount steel insert features a flat face and is designed for permanent installation into counterbored holes in jigs, fixtures, and workholding assemblies. It provides a threaded M6 mounting point with a flush or recessed surface, eliminating protruding hardware. The insert has a smooth finish and measures 25 mm in diameter with a 12 mm height

Lainnya dari KIPP

Lihat semua KIPP suku cadang →
Rear-mount insert with a smooth flat face, made from acetal (POM) with a black finish. Features a 20 mm diameter, M6 thread, and 10 mm height. Used in jigs, fixtures, and assembly tooling to provide a low-friction bearing surface for light-duty positioning and sliding applications
KIPP
Rear-mount insert with a smooth flat face, made from acetal (POM) with a black finish. Features a 20 mm diameter, M6 thread, and 10 mm height. Used in jigs, fixtures, and assembly tooling to provide a low-friction bearing surface for light-duty positioning and sliding applications
This rear-mount insert features a smooth flat face and is made from acetal, providing a low-friction bearing surface for locating or clamping workpieces in jigs, fixtures, and assembly tooling. It is designed for press-fit installation into a counterbored hole. The acetal body resists wear and corrosion, making it suitable for automated production lines and manual workstations
KIPP
This rear-mount insert features a smooth flat face and is made from acetal, providing a low-friction bearing surface for locating or clamping workpieces in jigs, fixtures, and assembly tooling. It is designed for press-fit installation into a counterbored hole. The acetal body resists wear and corrosion, making it suitable for automated production lines and manual workstations
This rear-mount insert features a smooth flat face and is made from acetal (POM) with a brass threaded insert. It provides a low-friction bearing surface for locating or clamping parts in jigs, fixtures, and workholding setups. The acetal body resists wear and corrosion, suitable for assembly and machining operations
KIPP
This rear-mount insert features a smooth flat face and is made from acetal (POM) with a brass threaded insert. It provides a low-friction bearing surface for locating or clamping parts in jigs, fixtures, and workholding setups. The acetal body resists wear and corrosion, suitable for assembly and machining operations
This rear-mount insert features a smooth flat face and an acetal body, providing low friction and corrosion resistance. It is designed for use in jigs, fixtures, and assembly equipment as a bearing surface or guide. The M6 thread allows secure rear mounting in workholding applications
KIPP
This rear-mount insert features a smooth flat face and an acetal body, providing low friction and corrosion resistance. It is designed for use in jigs, fixtures, and assembly equipment as a bearing surface or guide. The M6 thread allows secure rear mounting in workholding applications
This rear-mount insert features a flat face and is made from acetal, providing a low-friction bearing surface for locating or clamping workpieces in jigs and fixtures. It has a 12 mm diameter, M5 thread, and 10 mm height with a smooth surface. Suitable for use in assembly lines, inspection fixtures, and automated manufacturing environments
KIPP
This rear-mount insert features a flat face and is made from acetal, providing a low-friction bearing surface for locating or clamping workpieces in jigs and fixtures. It has a 12 mm diameter, M5 thread, and 10 mm height with a smooth surface. Suitable for use in assembly lines, inspection fixtures, and automated manufacturing environments
Rear-mount insert with a smooth flat face, made from acetal for low friction and chemical resistance. Features a 25 mm diameter, M6 thread, and 10 mm height. Used in jigs, fixtures, and workholding systems to provide a durable bearing surface for sliding or clamping components
KIPP
Rear-mount insert with a smooth flat face, made from acetal for low friction and chemical resistance. Features a 25 mm diameter, M6 thread, and 10 mm height. Used in jigs, fixtures, and workholding systems to provide a durable bearing surface for sliding or clamping components
This rear-mount insert features a flat face and is made from acetal, providing a low-friction bearing surface for locating or clamping workpieces in jig and fixture building. It has a 10 mm diameter, M5 thread, and 10 mm height. The smooth acetal body resists wear and corrosion, suitable for assembly lines, inspection fixtures, and automated workstations
KIPP
This rear-mount insert features a flat face and is made from acetal, providing a low-friction bearing surface for locating or clamping workpieces in jig and fixture building. It has a 10 mm diameter, M5 thread, and 10 mm height. The smooth acetal body resists wear and corrosion, suitable for assembly lines, inspection fixtures, and automated workstations
Rear-mount insert with a flat face, made from acetal for low friction and chemical resistance. Features a 25 mm diameter, M6 thread, and 12 mm height. Used in jigs, fixtures, and workholding systems as a bearing surface for locating or clamping parts
KIPP
Rear-mount insert with a flat face, made from acetal for low friction and chemical resistance. Features a 25 mm diameter, M6 thread, and 12 mm height. Used in jigs, fixtures, and workholding systems as a bearing surface for locating or clamping parts