Kami mengirim ke Indonesia — pintu ke pintu, bea cukai dan logistik ditangani oleh 3G Electric

3G Electric
Keranjang Permintaan PenawaranMinta PenawaranMasukDaftar
LABCONCO 9500601 Epoxy Fume Hood Work Surface - Fume Hood Work Surfaces
LABCONCOFume Hood Work Surfaces

LABCONCO 9500601 Epoxy Fume Hood Work Surface

LABCONCO Spill Stop Work Surface adalah meja kerja fume hood berbahan epoxy dengan ketebalan 1 1/4 in, dirancang khusus untuk Protector Premier Laboratory Hoods. Permukaan kerja ini memiliki bentuk cekung dan kontur…

SKU 3G-OTH-364082

Merek
LABCONCO
Item
9500601 Epoxy Fume Hood Work Surface
Part Number
9500601
Kategori
Fume Hood Work Surfaces
Tersedia untuk Dipesan
Also known as:9500601LABCONCO
Stok tersedia & bea cukai ditangani
  • 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
  • Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
  • Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Harga dagang sesuai penawaran — balasan dalam 24 jam
Jumlah
WhatsApp seorang insinyurMessage via Telegram
Tidak perlu akun — permintaan penawaran Anda langsung masuk ke tim insinyur kami. Akun gratis memungkinkan Anda melacak penawaran dan memesan ulang lebih cepat.
Pengiriman ke Seluruh Dunia
Pengiriman udara & laut
Lembar Data Atas Permintaan
Spesifikasi teknis
Penawaran 1 Hari
Balasan dalam 24 jam

Local availability & support — Indonesia

Phone
+65 8878 8355

Spesifikasi Teknis

LABCONCO
Manufacturer Part Number
9500601
Type
Epoxy
Material
Epoxy
Overall Lg
6 ft
Thick
1 1/4 in
Features
Dished and Contoured to Conform to the Interior Liner of Laboratory Hoods
For Use With
Protector Premier Laboratory Hoods
Product Type
Fume Hood Work Surface
Cup Sink Cut-Out Location
Right Rear

Dokumen Teknis

Tidak ada dokumen teknis yang tersedia untuk produk ini.
Minta dokumentasi →
Tidak yakin ini adalah suku cadang yang tepat? Minta rekomendasi.

Butuh bantuan pemasangan atau rekayasa?

Instalasi, komisioning, rencana pemeliharaan, desain sistem, dan penawaran produk + layanan bundel — satu tim menangani cakupan penuh.
Bicaralah dengan seorang insinyur

Ajukan pertanyaan

LABCONCO Produk
3G Electric (S) Pte. Ltd. — Singapore

Deskripsi Produk

LABCONCO Spill Stop Work Surface adalah meja kerja fume hood berbahan epoxy dengan ketebalan 1 1/4 in, dirancang khusus untuk Protector Premier Laboratory Hoods. Permukaan kerja ini memiliki bentuk cekung dan kontur yang sesuai dengan liner interior hood laboratorium, serta dilengkapi potongan cup sink di bagian kanan belakang. Dengan panjang keseluruhan 6 ft dan lebar 30 in, produk ini memberikan area kerja yang aman dan tahan terhadap tumpahan bahan kimia di laboratorium.

Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.

Pertanyaan yang Sering Diajukan

Apa fungsi LABCONCO Spill Stop Work Surface?

LABCONCO Spill Stop Work Surface berfungsi sebagai meja kerja fume hood yang menahan tumpahan bahan kimia. Permukaannya terbuat dari epoxy setebal 1 1/4 in, dengan bentuk cekung yang sesuai dengan liner interior Protector Premier Laboratory Hoods. Produk ini juga dilengkapi potongan cup sink di bagian kanan belakang untuk memudahkan pembuangan limbah cair.

Apa spesifikasi LABCONCO Spill Stop Work Surface?

Spesifikasi LABCONCO Spill Stop Work Surface meliputi: bahan epoxy, ketebalan 1 1/4 in, panjang keseluruhan 6 ft, lebar 30 in, dan dilengkapi potongan cup sink di kanan belakang. Produk ini dirancang untuk digunakan dengan Protector Premier Laboratory Hoods dan memiliki fitur dished and contoured yang sesuai dengan liner interior hood.

Di mana beli LABCONCO Spill Stop Work Surface di Indonesia?

Anda dapat membeli LABCONCO Spill Stop Work Surface melalui 3G Electric, distributor resmi yang memasok dan mengirimkan produk ini ke seluruh Indonesia. Kami menangani logistik dan bea cukai untuk memastikan produk sampai ke lokasi Anda. Hubungi kami untuk informasi lebih lanjut dan minta penawaran.

Bagaimana cara memilih LABCONCO Spill Stop Work Surface yang tepat?

Untuk memilih LABCONCO Spill Stop Work Surface yang tepat, pastikan produk ini kompatibel dengan Protector Premier Laboratory Hoods Anda. Periksa spesifikasi seperti bahan epoxy, ketebalan 1 1/4 in, panjang 6 ft, dan lebar 30 in. Jika Anda memerlukan cup sink, pastikan memilih varian dengan potongan di kanan belakang seperti model 9500601.

Digunakan dalam

Aplikasi umum untuk LABCONCO
Forensic laboratories — LABCONCO Evidence Drying Cabinet with UV Light for drying and preserving evidence.
Pharmaceutical compounding — LABCONCO XPert Filtered Balance System for safe handling of bulk powders.
Biological research — LABCONCO Class II Type B2 Biosafety Cabinet for product and personnel protection.
Chemical fume hood maintenance — LABCONCO Flexible Circulation Tubing Kit for replacing neoprene tubing in exhaust systems.
Freeze drying operations — LABCONCO stainless steel chamber (MPN 7522800) as a replacement accessory for freeze dryers.
Laboratory hood installation — LABCONCO Lower Exhaust Transition Adapter for connecting fume hoods to ductwork.
Not sure this is the right part? Photo-identify it→

LABCONCO Produk

3G Electric memasok LABCONCO fume hood work surfaces. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.

Anda mungkin juga membutuhkan

Pembakar & Pembakaran →Pompa & Kompresor →Suku Cadang →Semua Produk →

Lainnya dari LABCONCO

Lihat semua LABCONCO suku cadang →
Epoxy fume hood work surface, 6 ft long by 1 1/4 in thick, with pre-drilled holes for venting and plumbing. Designed for use with Protector ClassMate laboratory hoods. No cup sink cut-out included
LABCONCO
Epoxy fume hood work surface, 6 ft long by 1 1/4 in thick, with pre-drilled holes for venting and plumbing. Designed for use with Protector ClassMate laboratory hoods. No cup sink cut-out included
This stainless steel work surface is designed for use with XPert Filtered Balance Stations. It provides a flat, corrosion-resistant platform for laboratory procedures. The surface measures 24 inches in overall length and 13/16 inches in thickness, with no cup sink cut-out
LABCONCO
This stainless steel work surface is designed for use with XPert Filtered Balance Stations. It provides a flat, corrosion-resistant platform for laboratory procedures. The surface measures 24 inches in overall length and 13/16 inches in thickness, with no cup sink cut-out
Epoxy fume hood work surface measuring 4 ft long by 1-1/4 in thick, with a left rear cup sink cut-out. Corrosion resistant for use in laboratory fume hoods, providing a durable bench area that withstands chemical exposure
LABCONCO
Epoxy fume hood work surface measuring 4 ft long by 1-1/4 in thick, with a left rear cup sink cut-out. Corrosion resistant for use in laboratory fume hoods, providing a durable bench area that withstands chemical exposure
This epoxy work surface is designed for use with XPert Filtered Balance Stations. It measures 6 ft in overall length, 1 in in thickness, and does not include a cup sink cut-out. The epoxy material provides a chemical-resistant platform for laboratory weighing and handling applications
LABCONCO
This epoxy work surface is designed for use with XPert Filtered Balance Stations. It measures 6 ft in overall length, 1 in in thickness, and does not include a cup sink cut-out. The epoxy material provides a chemical-resistant platform for laboratory weighing and handling applications
Epoxy fume hood work surface, 6 ft overall length, 1 1/4 in thick, dished and contoured to conform to the interior liner of laboratory hoods. Includes a cup sink cut-out on the right side. For use with Protector XL Laboratory Hoods
LABCONCO
Epoxy fume hood work surface, 6 ft overall length, 1 1/4 in thick, dished and contoured to conform to the interior liner of laboratory hoods. Includes a cup sink cut-out on the right side. For use with Protector XL Laboratory Hoods
This 1-inch-thick epoxy work surface is designed for use with Paramount Ductless Enclosures. It provides a chemical-resistant bench area for laboratory procedures, protecting the enclosure base from spills and corrosion. The surface measures 4 feet in length and does not include a cup sink cut-out
LABCONCO
This 1-inch-thick epoxy work surface is designed for use with Paramount Ductless Enclosures. It provides a chemical-resistant bench area for laboratory procedures, protecting the enclosure base from spills and corrosion. The surface measures 4 feet in length and does not include a cup sink cut-out
Epoxy fume hood work surface with pre-drilled holes for venting and plumbing. Includes a cup sink cut-out on the right side. Designed for use with Protector Premier Laboratory Hoods. Overall length 8 ft, thickness 1 1/4 in
LABCONCO
Epoxy fume hood work surface with pre-drilled holes for venting and plumbing. Includes a cup sink cut-out on the right side. Designed for use with Protector Premier Laboratory Hoods. Overall length 8 ft, thickness 1 1/4 in
This epoxy fume hood work surface is 5 ft long and 1 1/4 in thick, featuring a cup sink cut-out at the right rear. It is corrosion resistant and designed for use with the Protector XStream Laboratory Hood. Typical applications include providing a durable, chemical-resistant work area in laboratory fume hoods
LABCONCO
This epoxy fume hood work surface is 5 ft long and 1 1/4 in thick, featuring a cup sink cut-out at the right rear. It is corrosion resistant and designed for use with the Protector XStream Laboratory Hood. Typical applications include providing a durable, chemical-resistant work area in laboratory fume hoods

Ulasan pelanggan

No reviews yet — be the first

Questions & answers

No questions yet — ask us the first