Kami mengirim ke Indonesia — pintu ke pintu, bea cukai dan logistik ditangani oleh 3G Electric

3G Electric
Keranjang Permintaan PenawaranMinta PenawaranMasukDaftar
LABCONCO Epoxy Fume Hood Work Surface - Fume Hood Work Surfaces
LABCONCOFume Hood Work Surfaces

LABCONCO Epoxy Fume Hood Work Surface

LABCONCO Spill Stop Work Surface adalah permukaan kerja fume hood berbahan epoxy dengan ketebalan 1 1/4 in, dirancang khusus untuk digunakan dengan Protector Premier Laboratory Hoods. Produk ini memiliki lebar…

SKU 3G-OTH-364087

Merek
LABCONCO
Item
Epoxy Fume Hood Work Surface
Part Number
9500802
Kategori
Fume Hood Work Surfaces
Tersedia untuk Dipesan
Also known as:9500802LABCONCO
Stok tersedia & bea cukai ditangani
  • 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
  • Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
  • Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Harga dagang sesuai penawaran — balasan dalam 24 jam
Jumlah
WhatsApp seorang insinyurMessage via Telegram
Tidak perlu akun — permintaan penawaran Anda langsung masuk ke tim insinyur kami. Akun gratis memungkinkan Anda melacak penawaran dan memesan ulang lebih cepat.
Pengiriman ke Seluruh Dunia
Pengiriman udara & laut
Lembar Data Atas Permintaan
Spesifikasi teknis
Penawaran 1 Hari
Balasan dalam 24 jam

Local availability & support — Indonesia

Phone
+65 8878 8355

Spesifikasi Teknis

LABCONCO
Manufacturer Part Number
9500802
Type
Epoxy
Material
Epoxy
Overall Lg
8 ft
Thick
1 1/4 in
Features
Pre-Drilled Holes for Venting and Plumbing
For Use With
Protector Premier Laboratory Hoods
Product Type
Fume Hood Work Surface
Cup Sink Cut-Out Location
Right Side

Dokumen Teknis

Tidak ada dokumen teknis yang tersedia untuk produk ini.
Minta dokumentasi →
Tidak yakin ini adalah suku cadang yang tepat? Minta rekomendasi.

Butuh bantuan pemasangan atau rekayasa?

Instalasi, komisioning, rencana pemeliharaan, desain sistem, dan penawaran produk + layanan bundel — satu tim menangani cakupan penuh.
Bicaralah dengan seorang insinyur

Ajukan pertanyaan

LABCONCO Produk
3G Electric (S) Pte. Ltd. — Singapore

Deskripsi Produk

LABCONCO Spill Stop Work Surface adalah permukaan kerja fume hood berbahan epoxy dengan ketebalan 1 1/4 in, dirancang khusus untuk digunakan dengan Protector Premier Laboratory Hoods. Produk ini memiliki lebar keseluruhan 30 in dan panjang 8 ft, dilengkapi lubang pra-bor untuk ventilasi dan pipa ledeng, serta sudah termasuk potongan untuk wastafel cangkir di sisi kanan. Cocok untuk laboratorium yang membutuhkan permukaan tahan bahan kimia dan mudah dibersihkan.

Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.

Pertanyaan yang Sering Diajukan

Apa spesifikasi LABCONCO Spill Stop Work Surface 9500802?

LABCONCO Spill Stop Work Surface dengan nomor bagian 9500802 memiliki lebar 30 in, panjang 8 ft, dan ketebalan 1 1/4 in. Terbuat dari bahan epoxy, sudah termasuk potongan wastafel cangkir di sisi kanan, serta dilengkapi lubang pra-bor untuk ventilasi dan pipa ledeng. Produk ini dirancang untuk Protector Premier Laboratory Hoods.

Untuk apa LABCONCO Spill Stop Work Surface digunakan?

Permukaan kerja ini digunakan sebagai alas tahan bahan kimia di dalam fume hood laboratorium, khususnya untuk Protector Premier Laboratory Hoods. Dengan bahan epoxy dan desain anti-tumpahan, produk ini membantu menjaga kebersihan area kerja serta memudahkan pemasangan ventilasi dan pipa ledeng berkat lubang pra-bor yang sudah tersedia.

Di mana beli LABCONCO Spill Stop Work Surface di Indonesia?

Anda dapat membeli LABCONCO Spill Stop Work Surface melalui 3G Electric, distributor resmi yang memasok dan mengirimkan produk ini ke seluruh Indonesia. Kami menangani logistik dan bea cukai sehingga Anda tidak perlu repot mengurus impor. Hubungi kami untuk minta penawaran.

Apakah LABCONCO Spill Stop Work Surface sudah termasuk potongan wastafel?

Ya, produk ini sudah termasuk potongan untuk wastafel cangkir (cup sink cut-out) yang terletak di sisi kanan. Selain itu, permukaan kerja ini juga dilengkapi lubang pra-bor untuk ventilasi dan pipa ledeng, sehingga memudahkan instalasi tanpa perlu modifikasi tambahan.

Digunakan dalam

Aplikasi umum untuk LABCONCO
Forensic laboratories — LABCONCO Evidence Drying Cabinet with UV Light for drying and preserving evidence.
Pharmaceutical compounding — LABCONCO XPert Filtered Balance System for safe handling of bulk powders.
Biological research — LABCONCO Class II Type B2 Biosafety Cabinet for product and personnel protection.
Chemical fume hood maintenance — LABCONCO Flexible Circulation Tubing Kit for replacing neoprene tubing in exhaust systems.
Freeze drying operations — LABCONCO stainless steel chamber (MPN 7522800) as a replacement accessory for freeze dryers.
Laboratory hood installation — LABCONCO Lower Exhaust Transition Adapter for connecting fume hoods to ductwork.
Not sure this is the right part? Photo-identify it→

LABCONCO Produk

3G Electric memasok LABCONCO fume hood work surfaces. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.

Anda mungkin juga membutuhkan

Pembakar & Pembakaran →Pompa & Kompresor →Suku Cadang →Semua Produk →

Lainnya dari LABCONCO

Lihat semua LABCONCO suku cadang →
Epoxy fume hood work surface, 6 ft long by 1 1/4 in thick, with pre-drilled holes for venting and plumbing. Designed for use with Protector ClassMate laboratory hoods. No cup sink cut-out included
LABCONCO
Epoxy fume hood work surface, 6 ft long by 1 1/4 in thick, with pre-drilled holes for venting and plumbing. Designed for use with Protector ClassMate laboratory hoods. No cup sink cut-out included
This stainless steel work surface is designed for use with XPert Filtered Balance Stations. It provides a flat, corrosion-resistant platform for laboratory procedures. The surface measures 24 inches in overall length and 13/16 inches in thickness, with no cup sink cut-out
LABCONCO
This stainless steel work surface is designed for use with XPert Filtered Balance Stations. It provides a flat, corrosion-resistant platform for laboratory procedures. The surface measures 24 inches in overall length and 13/16 inches in thickness, with no cup sink cut-out
Epoxy fume hood work surface measuring 4 ft long by 1-1/4 in thick, with a left rear cup sink cut-out. Corrosion resistant for use in laboratory fume hoods, providing a durable bench area that withstands chemical exposure
LABCONCO
Epoxy fume hood work surface measuring 4 ft long by 1-1/4 in thick, with a left rear cup sink cut-out. Corrosion resistant for use in laboratory fume hoods, providing a durable bench area that withstands chemical exposure
This epoxy work surface is designed for use with XPert Filtered Balance Stations. It measures 6 ft in overall length, 1 in in thickness, and does not include a cup sink cut-out. The epoxy material provides a chemical-resistant platform for laboratory weighing and handling applications
LABCONCO
This epoxy work surface is designed for use with XPert Filtered Balance Stations. It measures 6 ft in overall length, 1 in in thickness, and does not include a cup sink cut-out. The epoxy material provides a chemical-resistant platform for laboratory weighing and handling applications
Epoxy fume hood work surface, 6 ft overall length, 1 1/4 in thick, dished and contoured to conform to the interior liner of laboratory hoods. Includes a cup sink cut-out on the right side. For use with Protector XL Laboratory Hoods
LABCONCO
Epoxy fume hood work surface, 6 ft overall length, 1 1/4 in thick, dished and contoured to conform to the interior liner of laboratory hoods. Includes a cup sink cut-out on the right side. For use with Protector XL Laboratory Hoods
This 1-inch-thick epoxy work surface is designed for use with Paramount Ductless Enclosures. It provides a chemical-resistant bench area for laboratory procedures, protecting the enclosure base from spills and corrosion. The surface measures 4 feet in length and does not include a cup sink cut-out
LABCONCO
This 1-inch-thick epoxy work surface is designed for use with Paramount Ductless Enclosures. It provides a chemical-resistant bench area for laboratory procedures, protecting the enclosure base from spills and corrosion. The surface measures 4 feet in length and does not include a cup sink cut-out
Epoxy work surface for fume hoods, dished and contoured to conform to the interior liner of laboratory hoods. Includes a cup sink cut-out at the right rear. Overall length 6 ft, width 30 in, thickness 1-1/4 in. For use with Protector Premier Laboratory Hoods
LABCONCO
Epoxy work surface for fume hoods, dished and contoured to conform to the interior liner of laboratory hoods. Includes a cup sink cut-out at the right rear. Overall length 6 ft, width 30 in, thickness 1-1/4 in. For use with Protector Premier Laboratory Hoods
This epoxy fume hood work surface is 5 ft long and 1 1/4 in thick, featuring a cup sink cut-out at the right rear. It is corrosion resistant and designed for use with the Protector XStream Laboratory Hood. Typical applications include providing a durable, chemical-resistant work area in laboratory fume hoods
LABCONCO
This epoxy fume hood work surface is 5 ft long and 1 1/4 in thick, featuring a cup sink cut-out at the right rear. It is corrosion resistant and designed for use with the Protector XStream Laboratory Hood. Typical applications include providing a durable, chemical-resistant work area in laboratory fume hoods

Ulasan pelanggan

No reviews yet — be the first

Questions & answers

No questions yet — ask us the first