LEGRIS Push-Fit Elbow Fitting: 1/8 in OD x 1/4 in Pipe Size, Push-to-Connect x MNPT
The LEGRIS Push-Fit Elbow Fitting (MPN 3113 53 14) is a nylon and nickel-plated brass tube fitting with a Push-to-Connect x MNPT configuration, designed for 1/8 in OD tubing and 1/4 in pipe size. It has an overall…
SKU 3G-OTH-492457
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The LEGRIS Push-Fit Elbow Fitting (MPN 3113 53 14) is a nylon and nickel-plated brass tube fitting with a Push-to-Connect x MNPT configuration, designed for 1/8 in OD tubing and 1/4 in pipe size. It has an overall length of 1 in. 3G Electric interprets your demand for this OEM-specified component, sourcing it across 14 industrial departments with specialist depth in pneumatics and controls.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the LEGRIS Push-Fit Elbow Fitting used for?
The LEGRIS Push-Fit Elbow Fitting (3113 53 14) connects 1/8 in OD nylon tubing to a 1/4 in male NPT port in pneumatic systems. It is commonly used in industrial automation, packaging, and material handling applications where a compact, leak-free 90° turn is required.
What are the specifications of the LEGRIS 3113 53 14 fitting?
This LEGRIS fitting is a Push-to-Connect x MNPT elbow with 1/8 in OD tube size and 1/4 in pipe size. It has an overall length of 1 in and is made from nylon and nickel-plated brass. The manufacturer part number is 3113 53 14.
Where to buy LEGRIS push-fit fittings worldwide?
3G Electric supplies the LEGRIS Push-Fit Elbow Fitting (3113 53 14) to customers worldwide. We handle full logistics, customs clearance, and delivery for this OEM-specified component, sourcing across 14 industrial departments with specialist depth in pneumatics and controls.
How to install a LEGRIS push-to-connect elbow fitting?
To install the LEGRIS 3113 53 14, cut the 1/8 in OD tubing square, push it fully into the fitting until it stops, then pull back slightly to lock. For the MNPT end, apply thread sealant and tighten to the port. Ensure the system is depressurized before installation.
Digunakan dalam
Aplikasi umum untuk LEGRISLEGRIS Produk
3G Electric memasok LEGRIS nylon & nickel-plated brass tube fittings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.









