MACURCO Calibration Gas: All OEM Gas Detectors, Air, NIST, Cylinder, 105 L Cylinder Capacity
The MACURCO Calibration Gas (SKU 68JZ95) is a NIST-traceable, 105 L cylinder of carbon monoxide (100 ppm) in air, designed for use with all OEM gas detectors. This calibration gas enables accurate sensor verification…
SKU 3G-OTH-551894
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The MACURCO Calibration Gas (SKU 68JZ95) is a NIST-traceable, 105 L cylinder of carbon monoxide (100 ppm) in air, designed for use with all OEM gas detectors. This calibration gas enables accurate sensor verification and compliance with safety protocols across industrial environments.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is MACURCO calibration gas used for?
MACURCO calibration gas is used to verify and calibrate all OEM gas detectors, ensuring accurate sensor response and compliance with industrial safety protocols. The 105 L cylinder contains 100 ppm carbon monoxide in air, NIST-traceable for reliable performance.
What are the specifications of MACURCO calibration gas?
The MACURCO calibration gas (MPN AIM-CO-100-105L-F) is a 105 L cylinder with a gas mixture of 100 ppm carbon monoxide in air. It is NIST-traceable, designed for use with all OEM gas detectors, and supplied by 3G Electric.
Where to buy MACURCO calibration gas worldwide?
3G Electric supplies MACURCO calibration gas worldwide, handling full logistics and customs clearance. As a global industrial solutions provider, we source and deliver this NIST-traceable 105 L cylinder of 100 ppm CO in air to support your safety compliance needs.
How to use MACURCO calibration gas for detector testing?
Attach the regulator to the MACURCO calibration gas cylinder, then apply the gas to the detector's sensor port at the recommended flow rate. Allow the reading to stabilize, then adjust the detector to match the 100 ppm CO concentration. Always follow the detector manufacturer's instructions.
Digunakan dalam
Aplikasi umum untuk MACURCOMACURCO Produk
3G Electric memasok MACURCO calibration gases for fixed gas detectors. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.









