MACURCO Calibration Gas: RD-12/RD-6, Air, Cylinder, 34 L Cylinder Capacity
The MACURCO Calibration Gas (SKU 817GK5) is a 34 L cylinder of air with 5,000 ppm Refrigerant R-410A, designed for use with the RD-6 fixed gas detector. This calibration gas ensures accurate sensor performance by…
SKU 3G-OTH-551882
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The MACURCO Calibration Gas (SKU 817GK5) is a 34 L cylinder of air with 5,000 ppm Refrigerant R-410A, designed for use with the RD-6 fixed gas detector. This calibration gas ensures accurate sensor performance by providing a known concentration of R-410A in a background of air.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is MACURCO calibration gas used for?
MACURCO calibration gas is used to verify and adjust the accuracy of fixed gas detectors like the RD-6. This 34 L cylinder contains 5,000 ppm Refrigerant R-410A in air, ensuring the sensor responds correctly to refrigerant leaks in HVAC and industrial refrigeration applications.
What are the specifications of MACURCO calibration gas R-410A?
The MACURCO calibration gas (MPN R-410A Gas 5000PPM) is a 34 L cylinder with a gas mixture of 5,000 ppm Refrigerant R-410A in a background of air. It is designed for use with the RD-6 fixed gas detector and is supplied by 3G Electric as a genuine MACURCO product.
Where to buy MACURCO calibration gas worldwide?
3G Electric supplies MACURCO calibration gas worldwide, handling full logistics and customs clearance for international delivery. As a global industrial solutions provider, we source genuine MACURCO calibration gas cylinders and support procurement teams across 14 industrial departments.
How to use MACURCO calibration gas with RD-6 detector?
To calibrate an RD-6 detector, connect the MACURCO calibration gas cylinder to the detector's inlet using the appropriate regulator and tubing. Apply the gas at the specified flow rate, allow the reading to stabilize, then adjust the detector to match the 5,000 ppm R-410A concentration. Follow the manufacturer's manual for exact steps.
Digunakan dalam
Aplikasi umum untuk MACURCOMACURCO Produk
3G Electric memasok MACURCO calibration gases for fixed gas detectors. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.









